Technical data

The application and control parameters can be adjusted and downloaded.
Column Line no. contains the parameter number as shown in the parameter table.
Refer to section 3.14, control parameters.
Some parameters have a different range in ACS than in the room thermostats.
The thermostat does not accept changes that are outside its range. This can be
observed online by the fact that a changed value jumps back to the original value.
To be sure, use the ranges described in the parameter tables in section 3.14.
5.2.2 Operation and monitoring with ACS
In the ACS program, select Plant, then Open to open the plant.
To start monitoring and operation, select Applications, then Plant operation.
STOP
Note!
ACS Operating
84 / 102
Siemens RDG100KN, RDG160KN Basic documentation CE1P3191en
Building Technologies Supported KNX tools 2014-05-23