Technical data

7. Mechanical design
7.1 General
The room thermostat consists of 2 parts:
• Plastic housing with electronics, operating elements and room temperature
sensor
• Mounting plate with the screw terminals
The housing engages in the mounting plate and is secured with 2 screws.
1. Operating mode selector / Esc
2. Fan mode selector / Ok
3. Rotary knob to adjust setpoints and
parameters
For operation, refer to section 4.3.
7.2 Dimensions
Dimensions in mm
128.0
93.0
28.2
27.8
28.5
16.0
9.0
28.3
28.3
27.7
28.3
4.0
4.0
30.8
28.3
28.3
2
1
3
94 / 102
Siemens RDG100KN, RDG160KN Basic documentation CE1P3191en
Building Technologies Mechanical design 2014-05-23