User Manual

5
Smart Infrastructure
A6V11562461_en--_a
2019-09-19
Operation and settings
Normal display
1 Tap to display detailed information and additional settings.
2 Tap to display additional measurements, for example, outside air temperature. (Only if
external sensor is connected)
3 Tap to display notifications (only visible if any)
4 Room temperature
5 Tap to toggle between
At home
and
AWAY
.
6
Displays whether the thermostat is following a schedule (
) or following your
setpoint changes permanently (
). Following a schedule can mean the following:
● If there is a network connection and you’ve also set your schedule, the thermostat
follows your schedule. Your temporary change of the temperature setpoint only
takes effect during the currently scheduled mode.
● If the network is connected but no schedule set, the thermostat applies the
system’s default schedule.
● Without network connection or valid time, the thermostat cannot retrieve schedule
information from the Cloud. It always works in the
Comfort
mode.
7 Tap or slide to change the room temperature setpoint. *
The thermostat is in heating mode – at some point, the relay will be energized,
depending on the heating demand and application type.
The thermostat is not in heating mode.
NOTICE! * There is a few seconds’ delay between the color change in the temperature bar
and the reaction of the relays.