User Manual

6
Smart Infrastructure
A6V11562461_en--_a
2019-09-19
NOTICE
After initial setup of the thermostat, the displayed room temperature may not be correct
because the temperature sensors need time for calibration. Wait for at least one hour for
the calibration.
Idle display
The RDS110.R screen switches to idle mode after 2 minutes of inactivity. The idle screen of
the RDS110.R can be displayed as a simple screen with basic room values, or as a blank,
black screen. The simple screen is the default setting.
1 Relative room humidity
2 Room air quality status: good , average , poor . (Displayed only if an
external air quality sensor is connected to the thermostat)
3
Outside air temperature (displayed only if an external temperature sensor is
connected to the thermostat)
4 Green leaf: Energy-optimized mode.
Red leaf: Tap to restore the energy-optimized mode.
5 Room temperature
NOTE: The icons displayed in idle mode may differ if you’ve connected external sensors to
your thermostat. For example, the idle screen may display room air quality status or outside
air temperature if a related external sensor is connected to the thermostat. However, the
relative room humidity value and green leaf indication are always displayed on the idle
screen.
To set idle display
1. On the Home screen, tap , then tap until the Settings page displays.
2. Tap > , and then tap or to set the idle screen as pure blank or with values.
Type summary
Product number
Stock number
Description
RDS110.R S55772-T103 Smart Thermostat Wireless