User Manual

Getting started with your thermostat

Thermostat display overview

| 60

A6V11562455_en--_a

4.2 Thermostat display overview

1 Tap to display detailed information and additional settings.

2 Tap to display additional measurements, for example, outside air

temperature. (Only if external sensor is connected)

3 Tap to display notifications (only visible if any)

4 Room temperature

5 Tap to toggle between

At home

and

AWAY

Displays whether the thermostat is following a schedule ( ) or following

your setpoint changes permanently ( ). Following a schedule can mean

the following:

● If there is a network connection and you’ve also set your schedule, the

thermostat follows your schedule. Your temporary change of the

temperature setpoint only takes effect during the currently scheduled

mode.

● If the network is connected but no schedule set, the thermostat applies

the system’s default schedule. For more information on the default

schedule, see Time-based schedules [➙ 49].

● Without network connection or valid time, the thermostat cannot retrieve

schedule information from the Cloud. It always works in the

Comfort

mode.

7 Tap or slide to change the room temperature setpoint. *

The thermostat is in heating mode – at some point, the relay will be

energized, depending on the heating demand and application type.

The thermostat is not in heating mode.

NOTICE! * There is a few seconds’ delay between the color change in the

temperature bar and the reaction of the relays.

Normal display