User Manual

Operating the thermostat on the device
Temperature control
6
20
| 60 A6V11562455_en--_a
6 Operating the thermostat on the device
6.1 Temperature control
The thermostat acquires the room temperature using the built-in sensor and/or the
external room temperature sensor, and maintains the setpoint by delivering control
commands to heating and/or cooling equipment. On the home screen, the current
room temperature is displayed and the temperature setpoint can be changed as
desired. The temperature unit can be switched between °C and °F.
To adjust the temperature setpoint on the home screen
● On the Home screen, drag the temperature slider to the right to increase the
temperature setpoint, or to the left to decrease the temperature setpoint.
To change the temperature unit
1. On the Home screen, tap , and then tap .
2. Tap , then tap to change from Celsius to Fahrenheit, or tap to change
from Fahrenheit to Celsius.
6.2 Operating modes
The thermostat can operate in different modes:
● OFF vs. HEAT. If the space is not occupied for a long time, you can switch the
thermostat to
OFFinstead of keeping the thermostat running under the HEAT
mode. The thermostat will only ensure that the room temperature does not drop
below the protection temperature setpoint.
● At home vs. AWAY. Use AWAY when the space is not occupied for a few days.
The thermostat will always maintain the
Unoccupied temperature setpoint.
● Auto ( ) vs. manual ( ). Use to ensure optimal comfort with
maximum energy savings by using your own time schedule.