User Manual

Operating the thermostat with the mobile application
Notifications
9
A6V11562455_en
--_a 51 | 60
● If you enter the Geofence area,
– The thermostat switches to Comfort until the next scheduled mode starts if
a scheduled
Unoccupied mode is running.
– No change will be made, if a scheduled Economy mode is running, to avoid
heating when someone else is asleep at home.
– If more than one smartphone connects to the thermostat, the thermostat
reacts when the first smartphone appears in the Geofence area.
● If you leave the Geofence area,
– The thermostat switches to Unoccupied until the next scheduled mode
starts if a scheduled
Comfort or Economy mode is running.
– If more than one smartphone connects to the thermostat, the thermostat
reacts when the last smartphone disappears from the Geofence area.
9.7 Notifications
The mobile application notifies you of condensation risks and universal contact
status changes. If there are notifications, a red indicator appears on the upper right
corner of the menu icon, . Expanding displays the exact number of
notifications.
By default, the mobile application can receive condensation and universal contact
notifications. You can turn the notifications off as needed.
To view notifications
● Tap > Notifications.
9.7.1 Turning on/off the condensation monitoring function
If you’ve configured a condensation monitor as an input in the local thermostat, the
condensation monitor detects the formation of condensation on chilled ceilings or
at critical spots of heating or ventilation systems. If there is a risk of condensation,
the thermostat sends a warning signal for your control actions. The same signal
can also be sent to the mobile application if the related function is activated.
For more information about how to configure a condensation monitor input, see
Changing system setup [➙ 35].
To turn on/off the condensation monitoring function
1. Tap > Devices.
2. Select the device that you want to turn on or off the condensation monitoring
function for.
3. Drag the slider to the right or left to turn it on or off. The function is on by
default.
9.7.2 Turning on/off the universal contact monitoring function
If you’ve configured a universal contact as an input in the local thermostat, you can
use the mobile application to see if it is switched on or off if the universal contact
monitoring function is turned on.
For more information about how to configure a universal contact input, see
Changing system setup [➙ 35].