User Manual

About this User guide
Before you start
1
6
| 60 A6V11562455_en--_a
● The content of all documents is checked at regular intervals.
● All necessary corrections are included in subsequent versions.
● Documents are automatically amended as a consequence of modifications and
corrections to the products described.
Please make sure that you are aware of the latest document revision date.
If you find any lack of clarity while using this document, or if you have any criticisms
or suggestions, please contact your local point of contact (POC) at the nearest
branch office. Addresses for Siemens RCs are available at www.siemens.com/sbt
.
Markups
Special markups are shown in this document as follows:
⊳ Specifies the requirements that must be met before performing this
procedure.
1.
2.
Procedures must be performed in the specified order.
[➙ X] Reference to a page number
>
Relation sign and for identification between steps in a sequence, for
example,
Menu bar
>
Help
>
Help topics
.
Symbol identifications
WARNING
This is the symbol for hazard. It warns you of Risks of injury. Comply with all
measures designated by this symbol to prevent injury or death.
NOTICE
This symbol identifies an important notice that you should be aware of when you
are using the product.
The 'i' symbol identifies supplementary information and tips for an easier way of
working.
Before using products from Siemens Industry, Inc., it is important that you read the
documents supplied with or ordered at the same time as the products (equipment,
applications, tools, and so on) carefully and in full.
Before you get started, make sure you have an internet connection, a valid Email
address and a smartphone in hand.
Additional information on products and applications is available:
● At your Siemens branch office www.siemens.com/sbt
or at your system
suppliers.
● From the support team at headquarters [e-mail]
if there is no local point of contact.
Siemens assumes no liability to the extent allowed under the law for any losses
resulting from a failure to comply with the aforementioned points or for the
improper compliance of the same.
Conventions for text
marking
Document use/ request to
the reader