User Manual

2 / 91 A6V11562445_en--_a

2. Set an administrator password to prevent access to advanced

settings.

We recommend a strong password, particularly if the thermostat is

installed in a public location. If you decide to skip this step, you can

also set the password later under > Advanced Settings >

Password.

3. Two ways to set up a network connection:

 Select Network – Follow the on-screen step-by-step instructions

to connect to a WLAN

network.

 Push Button Setup – Connect to a WPS compatible router.

Note:

You can skip this step if the network connection fails or you want to

connect to the network another time.

Using the WPS router feature:

a. Press the WPS button on your router when prompted by your

thermostat.

b. Tap Connect on your thermostat to connect to the network.

c. After a connection is established, continue with other settings as

desired.

4. Select the equipment type.

 Tap to manually configure the thermostat.

 Select the type of heating system corresponding to your

thermostat.

Your thermostat operates in a frequency band range from 2.4 GHz to 2.4835 GHz, and the maximum radio-

frequency power transmitted in the frequency band is 18 dBm.