Data Sheet for Product

ManualsBrandsSiemens ManualsFire - Detectors & PeripheralsEnvironmental Product Declaration - RE6, RE6T

Building Technologies

Fire Safety & Security Products

DZ1191, RE6, RE6T, RE10, FDUM29x

AlgoRex

Synova™

Detector exchanger, Detector tester,

Telescope rods

for DS11/Synova fire detectors

z For quick and simple exchanging of fire detectors

– Detector exchanger DZ1191

z For the periodic performance check of fire detectors

– Detector tester RE6 for smoke detectors, with environmentally compatible test gas

– Test gas REF8 and REF8-S for smoke detectors

– Detector tester RE6T for heat detectors

– Detector tester RE10 for linear smoke detectors

z The telescope rod FDUM291 with continuous length adjustment up to approx.

5.5 m room height and the telescope rod FDUM292 with continuous length ad-

justment up to approx. 8 m room height serve as extension of detector testers

Summary of content (4 pages)

PAGE 1
DZ1191, RE6, RE6T, RE10, FDUM29x AlgoRex Synova™ Detector exchanger, Detector tester, Telescope rods for DS11/Synova fire detectors z For quick and simple exchanging of fire detectors – Detector exchanger DZ1191 z For the periodic performance check of fire detectors – Detector tester RE6 for smoke detectors, with environmentally compatible test gas – Test gas REF8 and REF8-S for smoke detectors – Detector tester RE6T for heat detectors – Detector tester RE10 for linear smoke detectors z The telescope ro
PAGE 2
Detector exchanger DZ1191 z During commissioning and servicing, a press and turn movement extracts or inserts the detector unit. z The detector exchanger consists of a guard ring with gripping mechanism and is equipped with an articulated rod which permits the removal and insertion of detectors that are accessible both vertically and laterally. Detector tester RE6 z The RE6 detector tester is used together with the REF8, REF8-S test gas can.
PAGE 3
Telescope rods FDUM291 and FDUM292 Characteristics – yellow plastic tubes in light and robust execution (non-conductive material) – plastic sockets and slide bearings provide for easy sliding of the tubes – quick spring-type locking mechanisms and continuous length adjustment – The tubes can be extended to their maximum length and are protected against further extension by a stop bolt. – Further extension of the telescope rods is not possible.
PAGE 4
Technical data RE6 with test gas can Operating and storage temperature – REF8 – REF8-S Number of detector tests, depending on model Mains connection RE6T -20… +40 °C, recommended use 0… +40 °C -20… +40 °C max. 400 220 VAC / 50… 60 Hz, ≈300 W Details for ordering Type DZ1191 Part no. BPZ:4589950001 Designation Detector exchanger Weight 0.