Data Sheet for Product

ManualsBrandsSiemens ManualsFire - TestTestfire 1001-101 ST test kit, Testfire 2001-101 RTCO test kit

Sinteso™

Test units and accessories

FDUL221, FDUD29x, FDUD29x-E, RE6, REF8, REF8-S, REF8-C, RE8, RE8-S, RE8-C,

RE7T, RE8ST, RE8STCO, RE8-CO, RE7T-x, RE10, FDUM29x, FDLU291, LE3, StabexHF

Test units to test detectors and detector lines for FS20fire detection installa-

tions

● Detector exchanger FDUD291 for the efficient installation and removal of Sinteso

point detectors

● Detector exchanger and tester FDUD292 and intelligent detector tester FDUD293

for commissioning, maintenance, and troubleshooting of point detectors, alarm

sounders, and linear smoke detectors

● Bluetooth extension kit FDUD29x-E for wireless communication between the de-

tector exchanger and tester FDUD292 and a mobile terminal

● Line tester FDUL221 for diagnosing detector lines

● Detector tester RE6 for use with environmentally-friendly test gas REF8, REF8-S,

REF8-C

● Detector tester RE7T with hot air generator, RE8ST with smoke capsule RE8-S,

RE8ST-CO with smoke capsule RE8-S, capsule RE8-CO, and CO capsule

● Detector tester RE10 for undertaking a function check on linear smoke detectors

● Telescope rods FDUM291/292 for extending detector exchanger, detector ex-

changer and tester, and other testers

007228_v_en_-- Smart Infrastructure

2021-09-03

Summary of content (22 pages)

PAGE 1
Sinteso™ Test units and accessories FDUL221, FDUD29x, FDUD29x-E, RE6, REF8, REF8-S, REF8-C, RE8, RE8-S, RE8-C, RE7T, RE8ST, RE8STCO, RE8-CO, RE7T-x, RE10, FDUM29x, FDLU291, LE3, StabexHF Test units to test detectors and detector lines for FS20 fire detection installations ● ● ● ● ● ● ● ● 007228_v_en_-2021-09-03 Detector exchanger FDUD291 for the efficient installation and removal of Sinteso point detectors Detector exchanger and tester FDUD292 and intelligent detector tester FDUD293 for commissioning,
PAGE 2
Line tester FDUL221 Properties ● ● ● ● ● ● ● 4-line display with 20 characters per line Menu-guided operation Supply with battery or via network adapter Possible to update the device software (firmware) via the MCL-USB adapter (radio) FDUZ227 and via a PC Environmentally friendly processing Reusable materials Electronic parts and synthetic materials can be easily separated Function Different functions can be called up, e.g.
PAGE 3
Fig.
PAGE 4
Use The line tester FDUL221 is a universal device for the final testing of fully installed FDnet fire detector lines if a control panel is not connected. The device is used to for error searches by the electrician, installer, or service technician.
PAGE 5
Detector exchanger FDUD291 Properties ● ● ● ● ● Possible to exchange the detector without a ladder or scaffolding up to a room height of 8 m with the help of the telescope rods Joint springs enable the point detectors to be inserted or removed at an angle The point detector can be held in four rotational positions This makes it easier to work efficiently Specially developed springs hold the point detector in the detector exchanger Compatible with – Telescope rods FDUM291/292 – Previous straight connectors
PAGE 6
Detector exchanger and tester FDUD292 and intelligent detector tester FDUD293 The detector exchanger and tester FDUD292 and the intelligent detector tester FDUD293 are universal tools for inserting and removing point detectors. The FDUD292 is used for commissioning and maintenance, and the FDUD293 for maintenance of the FDnet devices.
PAGE 7
Device Exceptions All manual call points FDM FDM231, FDM233, FDM234, FDM234H, FDM273 All alarm sounders FDS — A connection via the adapter cable FDUD292-A is possible with the following line devices: Device Exceptions All modules FDCI and FDCIO FDCI221, FDCI223, FDCIO221 Linear smoke detector FDL — 1 LEDs 7 Display 2 Manual call point FDM 8 Joint springs 3 Alarm sounder FDS 9 Keyboard 4 Point detectors FDO, FDOOT, FDOOTC, FDT 10 Modules FDC 5 Battery compartment on the rear 11 Linear sm
PAGE 8
Bluetooth extension kit FDUD29x-E ● ● ● For connecting the detector exchanger and tester FDUD292 to a mobile terminal Enables wireless data exchange between a detector exchanger and tester and a mobile terminal Compatible with detector exchanger and tester FDUD292 'Sinteso Test' Android app 'Sinteso Test' simplifies the process of comparing the data stored in the detection tree with the device information for installed peripheral devices.
PAGE 9
Detector tester RE6 ● ● ● ● The detector tester RE6 is used together with a test gas can REF8, REF8-S, or REF8-C. It is designed to test optical smoke detectors, ionization detectors, and CO detectors. The detector tester is positioned over the detector for the testing process. Brief pressure causes the test gas to flow into the measuring chamber of the detector and therefore simulate the presence of fire aerosols. After a short period of time, the detector responds and triggers the alarm.
PAGE 10
Detector tester RE7T – Solo461 heat detector tester kit The heat detector tester kit consists of ● 1x heat detector tester ● 2x rechargeable batteries ● 1x charger with 12 V connection cable ● 2x mains cables AC 110/120-220/240 V. The heat detector tester contains a hot air generator. The heat detector tester is positioned over the detector for the function check. The hot air emitted heats the detector which triggers this alarm.
PAGE 11
Detector tester RE8ST – Testifire 1001-101 RT test kit The test kit RE8ST consists of ● 1x Testifire 1001-101 tester ● 1x RE8-S smoke capsule ● 2x rechargeable batteries ● 1x charger with 12 V connection cable ● 2x mains cables AC 110/120-220/240 V ● 1x USB cable. The detector tester contains a smoke capsule. The detector tester is positioned over the detector for the function check. The smoke that is emitted triggers an alarm.
PAGE 12
Detector tester RE8STCO – Testifire 1001-101 ST test kit Fig. 4: The test kit RE8STCO consists of ● 1x Testifire 2001-101 tester ● 1x RE8-S smoke capsule ● 1x RE8-CO CO capsule ● 2x rechargeable batteries ● 1x charger with 12 V connection cable ● 2x mains cables AC 110/120-220/240 V ● 1x USB cable. The detector tester contains a smoke capsule or CO capsule. The detector tester is positioned over the detector for the function check. The smoke or gas that is emitted triggers an alarm.
PAGE 13
Accessories and spare parts for RE7T/RE8ST/RE8STCO RE7T-A – Solo719 adapter for FDUM29x Mounting adapter for the detector testers RE7T, RE8ST, and RE8STCO on the telescope rods FDUM291 and FDUM292 RE7T-B1 – Solo770 battery Battery as spare part RE7T-C1 (Solo727 charger) Charger as spare part for charging the batteries RE7T-B1 RE8-S smoke capsule for RE8ST and RE8STCO RE8-CO CO capsule for RE8STCO Smart Infrastructure 13 007228_v_en_-2021-09-03
PAGE 14
Telescope rods FDUM291 and FDUM292 Properties ● ● ● ● ● ● Light and robust yellow plastic pipes, non-conductive material Plastic sockets and friction bearings ensure that the pipes run into each other easily. Quick spring-type locking mechanisms allow continuous adjustment of the length. The pipes can be extended to their maximum length. A stop is used to prevent them from extending further. Existing testers can be used. The telescope rods cannot be extended.
PAGE 15
FDUM291 ● ● ● ● ● ● Light telescope rod for all applications in rooms up to 5.5 m high Flap closure for continuous adjustment of the length Three-part telescope with tri-oval pipes as practical grip Twisting the pipe in the opposite direction is not possible Weight: 1.2 kg without tester fitted Retracted length 1.6 m, extended length 4.
PAGE 16
Detector tester RE10, alarm test filter TF04 ● ● For undertaking a function check on the linear smoke detectors. The alarm test filter TF04 is inserted into the detector tester in accordance with the type of detector to be tested. An alarm test filter is also included in the adjustment kit FDLU291. For testing, the detector tester is held in front of the detector lens in the IR beam. The detector responds after a few seconds.
PAGE 17
LE3 Test lamp The test lamp LE3 is used to test the function of all flame detectors over distances up to 10 m. It is housed in a transportable case together with the required accessories. In addition, the case enables the test lamp to be kept in a dust-free condition. The quartz-halogen lamp used creates an intense ray of light. This helps to align the lamp on the detector which is to be tested. During the detector test, the ray of light is modulated.
PAGE 18
Technical data Line tester FDUL221 Supply voltage Lithium manganese dioxide battery or via network adapter Power consumption during measurement Min. DC 10 V, max. DC 30 V ULTRALIFE U9VL or U9VL‑J or EVE CR9V/ P‑S, 2x 9 V AC 240 V / DC 24 V, 750 mA Depends on the number of devices and the display backlight Detector line voltage: FDnet (FS20, AlgoRex) FDnet (SIGMASYS) DC 32 V DC 28 V Max. detector key figures (MK) per line MK with network adapter MK with battery Min. 550 Min.
PAGE 19
Detector tester RE8ST/RE8STCO Storage temperature -10…+50 °C Air humidity (no condensation permitted) ≤95 % rel. Voltage Auto: DC 12 V Mains: AC 110/120-220/240 V Charging time Approx. 1 hour per battery Adjustment kit FDLU291 Dimensions of the adjustment device 120 x 65 x 22 mm Test lamp LE3 Power consumption 50 W Modulation frequency 4 Hz Max. distance for alarm activation 10 m Measuring capacity with charged battery and max.
PAGE 20
Details for ordering Type Order number Designation Line tester FDUL221 A5Q00004397 Line tester with line connection kit FDUL221‑A, power unit set FDUL221‑B and carry case Lithium battery not included in scope of delivery 1.567 kg Accessories – A5Q00004142 Lithium manganese dioxide battery 9 V / 1.2 Ah 0.035 kg Spare part FDUL221-A A5Q00008436 Line connection kit 0.088 kg FDUL221-B A5Q00008437 Power unit kit 0.
PAGE 21
Type Spare part RE7T-B1 RE7T-C1 1 Order number S54370-N7-A1 S54370-N8-A1 Designation Solo770 battery for RE7T Weight 1 Solo727 charger for RE7T 1.090 kg 1 1.210 kg Compatible with RE8ST and RE8STCO Type Order number Designation Telescope rod FDUM291 A5Q00004996 Telescope rod – three-part telescope with tri-oval pipes, 1.6 m / 4.2 m 1.960 kg Spare part – A5Q00009787 Lever with screw and nut, flip top closure 0.023 kg – A5Q00009786 Adapter with lever, screw, and nut incl.
PAGE 22
Applicable documents Document ID Name 008331 List of compatibility (for 'Sinteso™' product line) 008164 Equipment overview Sinteso™ Detector system FD20 007227 Technical manual Detector exchanger and tester FDUD292 009718 Technical Manual Intelligent detector tester FDUD293 A6V10254740 Operating instructions Solo461 heat detector tester kit RE7T A6V10387053 Installation RE8ST Testifire 1001-101 ST test kit, RE8STCO Testifire 2001-101 STCO test kit A6V10260320 Operation RE7T-C Solo726 charger