User Manual

Symbols
“Time” menu
Automatic
operation
Comfort
setpoint
T
“Temperature”
menu
Continuously
comfort mode
Economy
setpoint
“Heating
periods” menu
Continuously
economy mode
Setpoint frost
protection
Frost
protection
Battery
change
24-hour mode
1 heating
period
Commissioning and quick start
Heating active
2 heating
periods
Time schedule
Functions of the roller selector
CLICK
Press:
• You access the menu
level
• You activate the menu
• You save the inputs
• You switch to the next
menu item
• You accept the menu
item
+
Roll:
• You go from one menu to the
next
• You change the setting
variables (temperature in
increments of 0.2 °C, time in
increments of hours and
minutes)
• You select predefined functions
1. Remove controller from its base and open cover
of the battery compartment.
2. Remove the black battery transit tab. The
controller will switch itself on.
3. Close the battery compartment and replace
the controller.
Selecting the operating mode
The operating mode selector enables you
to select 5 different operating modes:
Setting the time of day
• Automatic operation with a maximum of 2
heating periods
• Continuously comfort mode
• Continuously economy mode
• Continuously frost protection mode
• 24-hour mode with 1 heating period
Changing temporarily the current
setpoint temperature
CLICK
Ö
h
Ö
h
Ö
T
If no button is pressed for 10 seconds, the setting
displayed will be accepted and the initial display will
appear again.
1. Press: You enter the menu level;
the clock flashes.
2. Press: You select the next setting variable;
the hours flash.
3. Roll: You set the current hour.
4. Press: You select the next setting variable;
the minutes flash.
5. Roll: You set the current minute.
6. Press: You select the next menu;
the T flashes.
(Change not necessarily required)
° C
The change is
maintained until
the next
switching point is
reached!
Changing temperatures long-term
1. When pressing the or button for the
first time, the currently valid setpoint temperature
will be displayed. It can be readjusted in
increments of 0.2 °C (max. +/-4 °C).
2. After 3 seconds, the initial display will
automatically appear again.
Changing temporarily the
temperature setpoint (savings tip)
CLICK
Ö
T
Ö
° C
T
Ö
° C
T
Ö
° C
T
Ö
If no button is pressed for 10 seconds, the setting
displayed will be accepted and the initial display will
appear again.
1. Press: You enter the menu level;
the clock flashes.
2. Roll: Towards the display;
menu item T flashes.
3. Press: Select the next setting variable;
setpoint
flashes.
4. Roll: Readjust the comforttemperature.
5. Press: Select the next setting variable;
setpoint
flashes.
6. Roll: Readjust the Economytemperature.
7. Press: Select the next setting variable;
setpoint
flashes.
8. Roll: Readjust the frostprotection-
temperature.
9. Press: Select the next menu;
heating periods flashes.
(Change not necessarily required)
In operating modes and , this
button can be pressed to make a manual
change from comfort to economy mode,
or vice versa. The change will
automatically be cancelled when
reaching the next switching point or when
selecting another operating mode.
Siemens Building Technologies / HVAC Products CE1B2261en 18.04.2006
en
Operating Instructions
REV12
• Adjustable in operating modes , , and
• Adjustable in operating modes
, , and