System Manual
Table Of Contents
- SIMATIC RF200
- Legal information
- Table of contents
- 1 Introduction
- 2 Safety notes
- 3 System overview
- 4 Planning the RF200 system
- 4.1 Fundamentals of application planning
- 4.1.1 Selection criteria for SIMATIC RF200 components
- 4.1.2 Transmission window and read/write distance
- 4.1.3 Width of the transmission window
- 4.1.4 Impact of secondary fields
- 4.1.5 Permissible directions of motion of the transponder
- 4.1.6 Operation in static and dynamic mode
- 4.1.7 Dwell time of the transponder
- 4.1.8 Communication between communication module, reader and transponder
- 4.2 Field data of transponders and readers
- 4.3 Installation guidelines
- 4.4 Chemical resistance of the reader and transponders
- 4.5 Further information
- 4.1 Fundamentals of application planning
- 5 Readers
- 5.1 SIMATIC RF210R
- 5.2 SIMATIC RF210M
- 5.3 SIMATIC RF220R
- 5.4 SIMATIC RF240R
- 5.5 SIMATIC RF250R
- 5.6 SIMATIC RF260R
- 5.7 SIMATIC RF280R
- 5.8 SIMATIC RF285R
- 5.9 SIMATIC RF290R
- 6 Antennas
- 7 Transponder
- 7.1 Memory configuration of ISO the transponders
- 7.2 MDS D100
- 7.3 MDS D117
- 7.4 MDS D124
- 7.5 MDS D126
- 7.6 MDS D127
- 7.7 MDS D139
- 7.8 MDS D160
- 7.9 MDS D165
- 7.10 MDS D200
- 7.11 MDS D261
- 7.12 MDS D324
- 7.13 MDS D339
- 7.14 MDS D400
- 7.15 MDS D421
- 7.16 MDS D422
- 7.17 MDS D423
- 7.18 MDS D424
- 7.19 MDS D425
- 7.20 MDS D426
- 7.21 MDS D428
- 7.22 MDS D460
- 7.23 MDS D521
- 7.24 MDS D522
- 7.25 MDS D522 special variant
- 7.26 MDS D524
- 7.27 MDS D525
- 7.28 MDS D526
- 7.29 MDS D528
- 7.30 MDS D560
- 8 System integration
- 9 System diagnostics
- A Appendix
Planning the RF200 system
4.4 Chemical resistance of the reader and transponders
SIMATIC RF200
106 System Manual, 03/2019, J31069-D0227-U001-A11-7619
4.4 Chemical resistance of the reader and transponders
4.4.1 Readers
4.4.1.1 Overview of the readers and their housing materials
The following sections describe the chemical resistance of the various transponders. The
chemical resistance depends on the housing materials used to manufacture the reader. The
following table provides you with an overview of the housing materials that are used with the
readers:
Table 4- 53 Overview of the materials of the reader components
Readers
Individual parts of the
reader
Material of the component
RF210R
RF220R
Sleeves Brass (copper alloy)
CuZn40Pb2
Fiber-optic cable
Polymethylmethacrylate (Makrolon®2405)
Cap (antenna)
Thermocomp OF-1008-L-EM
Valox 357
RF240R
RF250R
RF260R
Top shell and base
plate
Polyamide 6.6 GF30
Fiber-optic cable
Polymethylmethacrylate (Makrolon®2405)
Decorative foil
1)
Polyester
RF280R Top shell and base
plate
Polyamide 12
Fiber-optic cable
Polymethylmethacrylate (Makrolon®2405)
Decorative foil
1)
Polyester
RF285R
RF290R
Top cover and bottom
Aluminum
Decorative membrane
Polyester
1)
Component irrelevant for resistance of the overall housing
If you have any questions, please contact Siemens Support, see section "Service & Support
(Page 458)".