System Manual
Table Of Contents
- SIMATIC RF200
- Legal information
- Table of contents
- 1 Introduction
- 2 Safety notes
- 3 System overview
- 4 Planning the RF200 system
- 4.1 Fundamentals of application planning
- 4.1.1 Selection criteria for SIMATIC RF200 components
- 4.1.2 Transmission window and read/write distance
- 4.1.3 Width of the transmission window
- 4.1.4 Impact of secondary fields
- 4.1.5 Permissible directions of motion of the transponder
- 4.1.6 Operation in static and dynamic mode
- 4.1.7 Dwell time of the transponder
- 4.1.8 Communication between communication module, reader and transponder
- 4.2 Field data of transponders and readers
- 4.3 Installation guidelines
- 4.4 Chemical resistance of the reader and transponders
- 4.5 Further information
- 4.1 Fundamentals of application planning
- 5 Readers
- 5.1 SIMATIC RF210R
- 5.2 SIMATIC RF210M
- 5.3 SIMATIC RF220R
- 5.4 SIMATIC RF240R
- 5.5 SIMATIC RF250R
- 5.6 SIMATIC RF260R
- 5.7 SIMATIC RF280R
- 5.8 SIMATIC RF285R
- 5.9 SIMATIC RF290R
- 6 Antennas
- 7 Transponder
- 7.1 Memory configuration of ISO the transponders
- 7.2 MDS D100
- 7.3 MDS D117
- 7.4 MDS D124
- 7.5 MDS D126
- 7.6 MDS D127
- 7.7 MDS D139
- 7.8 MDS D160
- 7.9 MDS D165
- 7.10 MDS D200
- 7.11 MDS D261
- 7.12 MDS D324
- 7.13 MDS D339
- 7.14 MDS D400
- 7.15 MDS D421
- 7.16 MDS D422
- 7.17 MDS D423
- 7.18 MDS D424
- 7.19 MDS D425
- 7.20 MDS D426
- 7.21 MDS D428
- 7.22 MDS D460
- 7.23 MDS D521
- 7.24 MDS D522
- 7.25 MDS D522 special variant
- 7.26 MDS D524
- 7.27 MDS D525
- 7.28 MDS D526
- 7.29 MDS D528
- 7.30 MDS D560
- 8 System integration
- 9 System diagnostics
- A Appendix
Planning the RF200 system
4.4 Chemical resistance of the reader and transponders
SIMATIC RF200
110 System Manual, 03/2019, J31069-D0227-U001-A11-7619
4.4.1.5 Polyamide 12
The resistance of the plastic housing to chemicals used in the automobile sector (e.g.: oils,
greases, diesel fuel, gasoline, etc,) is not listed extra.
Table 4- 57 Chemical resistance - Polyamide 12
Substance
Test conditions
Rating
Concentration [%]
Temperature [°C]
Battery acid
30%
20 ℃
++
Ammonia, gaseous
-
60 ℃
++++
Ammonia, w.
conc.
60 ℃
++++
10%
60 ℃
++++
Benzene
-
20 ℃
++++
-
60 ℃
+++
Bleach solution (12.5% effective chlo-
rine)
- 20 ℃ ++
Butane, gas, liquid
-
60 ℃
++++
Butyl acetate (acetic acid butyl ester)
-
60 ℃
++++
n(n)
-
20 ℃
++++
-
60 ℃
+++
Calcium chloride, w.
-
20 ℃
++++
-
60 ℃
+++
Calcium nitrate, w.
c. s.
20 ℃
++++
c. s.
60 ℃
+++
Chlorine
-
20 ℃
￮
Chrome baths, tech.
-
20 ℃
￮
Iron salts, w.
c. s.
60 ℃
++++
Acetic acid, w.
50%
20 ℃
￮
Ethyl alcohol, w., undenaturated
95%
20 ℃
++++
95%
60 ℃
+++
50%
60 ℃
++++
Formaldehyde, w.
30%
20 ℃
+++
10%
20 ℃
++++
10%
60 ℃
+++
Formalin
-
20 ℃
+++
Glycerine
-
60 ℃
++++
Isopropyl alcohol
-
20 ℃
++++
-
60 ℃
+++
Potassium hydroxide, w.
50%
60 ℃
++++
Lysol
-
20 ℃
++
Magnesium salts, w.
c. s.
60 ℃
++++
Methyl alcohol, w.
50%
60 ℃
++++