System Manual
Table Of Contents
- SIMATIC RF200
- Legal information
- Table of contents
- 1 Introduction
- 2 Safety notes
- 3 System overview
- 4 Planning the RF200 system
- 4.1 Fundamentals of application planning
- 4.1.1 Selection criteria for SIMATIC RF200 components
- 4.1.2 Transmission window and read/write distance
- 4.1.3 Width of the transmission window
- 4.1.4 Impact of secondary fields
- 4.1.5 Permissible directions of motion of the transponder
- 4.1.6 Operation in static and dynamic mode
- 4.1.7 Dwell time of the transponder
- 4.1.8 Communication between communication module, reader and transponder
- 4.2 Field data of transponders and readers
- 4.3 Installation guidelines
- 4.4 Chemical resistance of the reader and transponders
- 4.5 Further information
- 4.1 Fundamentals of application planning
- 5 Readers
- 5.1 SIMATIC RF210R
- 5.2 SIMATIC RF210M
- 5.3 SIMATIC RF220R
- 5.4 SIMATIC RF240R
- 5.5 SIMATIC RF250R
- 5.6 SIMATIC RF260R
- 5.7 SIMATIC RF280R
- 5.8 SIMATIC RF285R
- 5.9 SIMATIC RF290R
- 6 Antennas
- 7 Transponder
- 7.1 Memory configuration of ISO the transponders
- 7.2 MDS D100
- 7.3 MDS D117
- 7.4 MDS D124
- 7.5 MDS D126
- 7.6 MDS D127
- 7.7 MDS D139
- 7.8 MDS D160
- 7.9 MDS D165
- 7.10 MDS D200
- 7.11 MDS D261
- 7.12 MDS D324
- 7.13 MDS D339
- 7.14 MDS D400
- 7.15 MDS D421
- 7.16 MDS D422
- 7.17 MDS D423
- 7.18 MDS D424
- 7.19 MDS D425
- 7.20 MDS D426
- 7.21 MDS D428
- 7.22 MDS D460
- 7.23 MDS D521
- 7.24 MDS D522
- 7.25 MDS D522 special variant
- 7.26 MDS D524
- 7.27 MDS D525
- 7.28 MDS D526
- 7.29 MDS D528
- 7.30 MDS D560
- 8 System integration
- 9 System diagnostics
- A Appendix
Planning the RF200 system
4.4 Chemical resistance of the reader and transponders
SIMATIC RF200
System Manual, 03/2019, J31069-D0227-U001-A11-7619
113
Note
Chemical substances not listed
The following sections describe the resistance of the various transponders to specific
substances. If you require information about chemical substances that are not listed, contact
Customer Support.
4.4.2.2 Epoxy resin
Table 4- 59 Resistance to chemicals - epoxy resin
Substance
Test conditions
Rating
Concentration [%]
Temperature [°C]
Allyl chloride
-
20 ℃
++++
Formic acid
50%
20 ℃
++++
100%
20 ℃
++
Ammonia, gaseous
-
20 ℃
++++
Ammonia, liquid, water-free
-
20 ℃
￮
Ammonium hydroxide
10%
20 ℃
++++
Ethanol
-
40 ℃
++++
-
60 ℃
++++
Ethyl acrylate
-
20 ℃
++++
Ethyl glycol
-
60 ℃
++++
Gasoline, aroma-free
-
20 ℃
++++
Gasoline, containing benzene
-
20 ℃
++++
Benzoates (Na–, Ca– among others)
-
40 ℃
++++
Benzoic acid
-
20 ℃
++++
Benzene
-
20 ℃
++++
Borax
-
60 ℃
++++
Boric acid
-
20 ℃
++++
Bromine, liquid
-
20 ℃
￮
Bromides (K–, Na– among others)
-
60 ℃
++++
Bromoform
100%
20 ℃
++++
Bromine water
-
20 ℃
￮
Butadien (1.3–)
-
20 ℃
++++
Butane, gaseous
-
20 ℃
++++
Butanol
-
20 ℃
￮
Butyric acid
100%
20 ℃
++
Carbonates (ammonium–, Na– among
others)
- 60 ℃ ++++
Chlorine, liquid
-
20 ℃
￮
Chlorine, gaseous, dry
100%
20 ℃
￮