System Manual

Table Of Contents
Readers
5.8 SIMATIC RF285R
SIMATIC RF200
170 System Manual, 03/2019, J31069-D0227-U001-A11-7619
5.8.5 Installing the RF285R reader
5.8.5.1 Wall mounting
Use the holes in the housing to screw the device to the wall or onto a horizontal surface. The
position of the drill holes is shown in the following figure:
Figure 5-19 Drilling pattern for the RF285R (dimensions in mm)
A: M4 threaded socket for potential connection of the reader. You will find additional
information on the potential connection in the section "Further information (Page 120)".