System Manual
Table Of Contents
- SIMATIC RF200
- Legal information
- Table of contents
- 1 Introduction
- 2 Safety notes
- 3 System overview
- 4 Planning the RF200 system
- 4.1 Fundamentals of application planning
- 4.1.1 Selection criteria for SIMATIC RF200 components
- 4.1.2 Transmission window and read/write distance
- 4.1.3 Width of the transmission window
- 4.1.4 Impact of secondary fields
- 4.1.5 Permissible directions of motion of the transponder
- 4.1.6 Operation in static and dynamic mode
- 4.1.7 Dwell time of the transponder
- 4.1.8 Communication between communication module, reader and transponder
- 4.2 Field data of transponders and readers
- 4.3 Installation guidelines
- 4.4 Chemical resistance of the reader and transponders
- 4.5 Further information
- 4.1 Fundamentals of application planning
- 5 Readers
- 5.1 SIMATIC RF210R
- 5.2 SIMATIC RF210M
- 5.3 SIMATIC RF220R
- 5.4 SIMATIC RF240R
- 5.5 SIMATIC RF250R
- 5.6 SIMATIC RF260R
- 5.7 SIMATIC RF280R
- 5.8 SIMATIC RF285R
- 5.9 SIMATIC RF290R
- 6 Antennas
- 7 Transponder
- 7.1 Memory configuration of ISO the transponders
- 7.2 MDS D100
- 7.3 MDS D117
- 7.4 MDS D124
- 7.5 MDS D126
- 7.6 MDS D127
- 7.7 MDS D139
- 7.8 MDS D160
- 7.9 MDS D165
- 7.10 MDS D200
- 7.11 MDS D261
- 7.12 MDS D324
- 7.13 MDS D339
- 7.14 MDS D400
- 7.15 MDS D421
- 7.16 MDS D422
- 7.17 MDS D423
- 7.18 MDS D424
- 7.19 MDS D425
- 7.20 MDS D426
- 7.21 MDS D428
- 7.22 MDS D460
- 7.23 MDS D521
- 7.24 MDS D522
- 7.25 MDS D522 special variant
- 7.26 MDS D524
- 7.27 MDS D525
- 7.28 MDS D526
- 7.29 MDS D528
- 7.30 MDS D560
- 8 System integration
- 9 System diagnostics
- A Appendix
Readers
5.8 SIMATIC RF285R
SIMATIC RF200
System Manual, 03/2019, J31069-D0227-U001-A11-7619
173
5.8.6 Technical specifications
Table 5- 19 Technical specifications of the RF285R reader
6GT2821-7AC12
Product type designation
SIMATIC RF285R
Radio frequencies
Operating frequency, rated value
13.56 MHz
Electrical data
Maximum range
550 mm
Maximum data transmission speed
Reader ↔ transponder
ISO transponder
• Read • Approx. 1500 bytes/s
• Write • Approx. 1500 bytes/s
Typical transmission time for user data per byte
• for write access • 0.6 ms
• for read access • 0.6 ms
Multitag capability
Yes
Transmission speed
19.2, 57.6, 115.2 kBd
Read/write distances of the reader
See section "Field data (Page 39)"
MTBF (Mean Time Between Failures)
18 years
Interfaces
Electrical connector design
M12, 8-pin
Standard for interfaces for communication
RS232
Antenna external
ANT D1, D5 or D6 can be connected
Antenna connection
TNC socket
Mechanical specifications
Housing
• Material • Aluminum die-casting
• Color • Silver/anthracite
Recommended distance to metal
0 mm
Supply voltage, current consumption, power loss
Supply voltage
24 V DC (± 10%)
Typical current consumption
200 mA (at 24 V and 2 W transmit power)