System Manual

Table Of Contents
Readers
5.9 SIMATIC RF290R
SIMATIC RF200
System Manual, 03/2019, J31069-D0227-U001-A11-7619
183
5.9.5 Installing the RF290R reader
5.9.5.1 Wall mounting
Use the holes in the housing to screw the device to the wall or onto a horizontal surface. The
position of the drill holes is shown in the following figure:
Figure 5-25 Drilling pattern for the RF290R (dimensions in mm)
A: M4 threaded socket for potential connection of the reader. You will find further information
on the potential connection in the section "Further information (Page 120)".