System Manual
Table Of Contents
- SIMATIC RF200
- Legal information
- Table of contents
- 1 Introduction
- 2 Safety notes
- 3 System overview
- 4 Planning the RF200 system
- 4.1 Fundamentals of application planning
- 4.1.1 Selection criteria for SIMATIC RF200 components
- 4.1.2 Transmission window and read/write distance
- 4.1.3 Width of the transmission window
- 4.1.4 Impact of secondary fields
- 4.1.5 Permissible directions of motion of the transponder
- 4.1.6 Operation in static and dynamic mode
- 4.1.7 Dwell time of the transponder
- 4.1.8 Communication between communication module, reader and transponder
- 4.2 Field data of transponders and readers
- 4.3 Installation guidelines
- 4.4 Chemical resistance of the reader and transponders
- 4.5 Further information
- 4.1 Fundamentals of application planning
- 5 Readers
- 5.1 SIMATIC RF210R
- 5.2 SIMATIC RF210M
- 5.3 SIMATIC RF220R
- 5.4 SIMATIC RF240R
- 5.5 SIMATIC RF250R
- 5.6 SIMATIC RF260R
- 5.7 SIMATIC RF280R
- 5.8 SIMATIC RF285R
- 5.9 SIMATIC RF290R
- 6 Antennas
- 7 Transponder
- 7.1 Memory configuration of ISO the transponders
- 7.2 MDS D100
- 7.3 MDS D117
- 7.4 MDS D124
- 7.5 MDS D126
- 7.6 MDS D127
- 7.7 MDS D139
- 7.8 MDS D160
- 7.9 MDS D165
- 7.10 MDS D200
- 7.11 MDS D261
- 7.12 MDS D324
- 7.13 MDS D339
- 7.14 MDS D400
- 7.15 MDS D421
- 7.16 MDS D422
- 7.17 MDS D423
- 7.18 MDS D424
- 7.19 MDS D425
- 7.20 MDS D426
- 7.21 MDS D428
- 7.22 MDS D460
- 7.23 MDS D521
- 7.24 MDS D522
- 7.25 MDS D522 special variant
- 7.26 MDS D524
- 7.27 MDS D525
- 7.28 MDS D526
- 7.29 MDS D528
- 7.30 MDS D560
- 8 System integration
- 9 System diagnostics
- A Appendix
Transponder
7.4 MDS D124
SIMATIC RF200
286 System Manual, 03/2019, J31069-D0227-U001-A11-7619
The surface temperature of the MDS D124 transponder for hazardous areas for dust
depends on the ambient temperature range:
Table 7- 11 Temperature classes for hazardous areas for dust
Ambient temperature of the transponder
Permitted surface tem-
perature
RF210R, RF220R, RF240R,
RF250R (incl. all released anten-
nas), RF260R, RF310R, RF340R,
RF350R
RF380R
-25 ℃ ... +155 ℃
-25 ℃ ... +110 ℃
T180 °C
-25 ℃ ... +105 ℃
-25 ℃ ... +60 ℃
T130 °C
-25 ℃ ... +80 ℃
--
T95 °C
-25 ℃ ... +55 ℃
--
T80 °C
7.4.6 EC declaration of conformity according to directive 2014/34/EU MDS D124
The EC type-examination certificate for the MDS D124 transponder was substantiated by
TÜV 12 ATEX 084413 X. Based on this certificate, the CE declaration was made by the
manufacturer according to directive 2014/34/EU.
The manufacturing plant of the MDS D124 has an ATEX quality assurance system
recognized by DEKRA EXAM GmbH with notification number "BVS 11 ATEX ZQS/E111".
Manufacturer's address - distributor
Manufacturer's address - factory
Siemens AG
DE
– 76181 Karlsruhe, Germany
Siemens AG
Würzburger Str. 121
DE - 90766 Fürth, Germany
7.4.7 Dimension drawing
Figure 7-9 Dimension drawing of MDS D124
All dimensions in mm