System Manual
Table Of Contents
- SIMATIC RF200
- Legal information
- Table of contents
- 1 Introduction
- 2 Safety notes
- 3 System overview
- 4 Planning the RF200 system
- 4.1 Fundamentals of application planning
- 4.1.1 Selection criteria for SIMATIC RF200 components
- 4.1.2 Transmission window and read/write distance
- 4.1.3 Width of the transmission window
- 4.1.4 Impact of secondary fields
- 4.1.5 Permissible directions of motion of the transponder
- 4.1.6 Operation in static and dynamic mode
- 4.1.7 Dwell time of the transponder
- 4.1.8 Communication between communication module, reader and transponder
- 4.2 Field data of transponders and readers
- 4.3 Installation guidelines
- 4.4 Chemical resistance of the reader and transponders
- 4.5 Further information
- 4.1 Fundamentals of application planning
- 5 Readers
- 5.1 SIMATIC RF210R
- 5.2 SIMATIC RF210M
- 5.3 SIMATIC RF220R
- 5.4 SIMATIC RF240R
- 5.5 SIMATIC RF250R
- 5.6 SIMATIC RF260R
- 5.7 SIMATIC RF280R
- 5.8 SIMATIC RF285R
- 5.9 SIMATIC RF290R
- 6 Antennas
- 7 Transponder
- 7.1 Memory configuration of ISO the transponders
- 7.2 MDS D100
- 7.3 MDS D117
- 7.4 MDS D124
- 7.5 MDS D126
- 7.6 MDS D127
- 7.7 MDS D139
- 7.8 MDS D160
- 7.9 MDS D165
- 7.10 MDS D200
- 7.11 MDS D261
- 7.12 MDS D324
- 7.13 MDS D339
- 7.14 MDS D400
- 7.15 MDS D421
- 7.16 MDS D422
- 7.17 MDS D423
- 7.18 MDS D424
- 7.19 MDS D425
- 7.20 MDS D426
- 7.21 MDS D428
- 7.22 MDS D460
- 7.23 MDS D521
- 7.24 MDS D522
- 7.25 MDS D522 special variant
- 7.26 MDS D524
- 7.27 MDS D525
- 7.28 MDS D526
- 7.29 MDS D528
- 7.30 MDS D560
- 8 System integration
- 9 System diagnostics
- A Appendix
System integration
SIMATIC RF200
406 System Manual, 03/2019, J31069-D0227-U001-A11-7619
Configuration and parameter assignment by means of TIA Portal technology object
You can easily and quickly configure and parameterize the entire RF300 system in the TIA
Portal (as of STEP 7 Basic / Professional V14 SP 1) with the help of the "SIMATIC Ident"
technology object. You can find detailed information about the technology object in the TIA
Portal help.
→ Search for: Technology object "SIMATIC Ident"
Interface modules/communication modules and function blocks
The following table shows the most important features of the interface
modules/communication modules, as well as the compatible function blocks.
When assigning parameters (HW Config) to the communications and interface modules,
MOBY U, MOBY D, RF200, RF300 or RF600 must be selected.
Table 8- 1 Overview of interface modules/communication modules
ASM/
communications
module
Interfaces to the
application
(PLC)
Interfaces to the
reader
Reader con-
nections
Dimensions
(W x H x D)
Temperature
range
Type of
protec-
ton
ASM 456 PROFIBUS DP-
V1
2 x 8-pin connector
socket, M12
2 (parallel) 60 x 210 x 54
or 79 mm
0 ... +55 °C IP67
ASM 475 S7-300 (cen-
tral), ET200M
(PROFIBUS)
Via screw terminals
in front connector
2 40 x 125 x 120 mm 0 ... +60 °C IP20
SIMATIC
RF120C
S7-1200 (cen-
tral)
9-pin D-sub socket 1 30 x 100 x 75 mm 0 ... +55 °C IP20
SIMATIC
RF160C
PROFIBUS DP
/ DP-V0
2 x 8-pin connector
socket, M12
2 (parallel) 60 x 210 x 30 mm 0 ... +55 °C IP67
SIMATIC
RF170C
PROFIBUS DP-
V1
PROFINET IO
2 x 8-pin connector
socket, M12
2 (parallel) 90 x 130 x 60 mm -25 ... +55° C IP67
SIMATIC
RF180C
PROFINET IO 2 x 8-pin connector
socket, M12
2 (parallel) 60 x 210 x 54 mm 0 ... +60° C IP67
SIMATIC
RF182C
TCP/IP 2 x 8-pin connector
socket, M12
2 (parallel) 60 x 210 x 30 mm 0 ... +60 °C IP67
SIMATIC
RF185C/RF186
C/RF188C
PROFINET IO,
OPC UA
1, 2 or 4 x 8-pin con-
nector socket, M12
1, 2 or 4 (par-
allel)
60 x 165 x 45 mm -25 ... +55° C IP67
RFID 181EIP Ethernet IP 2 x 8-pin connector
socket, M12
2 (parallel) 60 x 210 x 54 mm 0 ... +60° C IP67