System Manual

System diagnostics
9.2 Diagnostics functions - STEP 7
SIMATIC RF200
System Manual, 03/2019, J31069-D0227-U001-A11-7619
411
9.2 Diagnostics functions - STEP 7
Further information on RFID diagnostics options can be found in the following function
manuals:
● Function manual Ident profile and Ident blocks
(https://support.industry.siemens.com/cs/us/en/view/106368029)
● Function Manual FB 45 (https://support.industry.siemens.com/cs/ww/en/view/21738808)
9.2.1 Reader diagnostics with "Reader Status" (SLG Status)
With this command you can query the status and diagnostics data of the reader.
Table 9- 2 Attribute "0x81" (mode 01), corresponds to UDT 110
Name
Type
Possible Values
(hex)
Comment
hardware char
0x31
0x32
0x33
0x34
0x41
0x4D
0x4E
Type of hardware
= RF260R
= RF210/220R
= RF240R
= RF250R
= RF290R
= RF280R with RS422
= RF280R with RS232
hardware_version word
0x0100
0x0010; 0x0029; 0x002B;
0x002C
HW version (reserved)
= RF200 without RF280R
= RF280R
loader_version word
0x00 ... 0xFF
0x00 ... 0xFF
Bootstrap loader version: e.g. 3130 (=version 1.0)
= Version (high byte)
= Version (low byte)
firmware
char
0x00 ... 0xFF
FW version : 33 (ASCII : 3 = RF2x0R)
firmware_version word
00 ... FF
00 ... FF
Firmware version: e.g. 3130 (=version 1.0)
= Version (high byte)
= Version (low byte)
driver char
0x31
0x32
0x33
Driver version 3964R
= 3964R
= ASCII
= ASCII/ScanMode
driver_version word
0x00 ... 0xFF
0x00 ... 0xFF
Driver version: e.g. 3132 (=version 1.2)
= Version (high byte)
= Version (low byte)
interface byte
0x01
0x02
Interface type
= RS-422
= RS-232