System Manual
Table Of Contents
- SIMATIC RF200
- Legal information
- Table of contents
- 1 Introduction
- 2 Safety notes
- 3 System overview
- 4 Planning the RF200 system
- 4.1 Fundamentals of application planning
- 4.1.1 Selection criteria for SIMATIC RF200 components
- 4.1.2 Transmission window and read/write distance
- 4.1.3 Width of the transmission window
- 4.1.4 Impact of secondary fields
- 4.1.5 Permissible directions of motion of the transponder
- 4.1.6 Operation in static and dynamic mode
- 4.1.7 Dwell time of the transponder
- 4.1.8 Communication between communication module, reader and transponder
- 4.2 Field data of transponders and readers
- 4.3 Installation guidelines
- 4.4 Chemical resistance of the reader and transponders
- 4.5 Further information
- 4.1 Fundamentals of application planning
- 5 Readers
- 5.1 SIMATIC RF210R
- 5.2 SIMATIC RF210M
- 5.3 SIMATIC RF220R
- 5.4 SIMATIC RF240R
- 5.5 SIMATIC RF250R
- 5.6 SIMATIC RF260R
- 5.7 SIMATIC RF280R
- 5.8 SIMATIC RF285R
- 5.9 SIMATIC RF290R
- 6 Antennas
- 7 Transponder
- 7.1 Memory configuration of ISO the transponders
- 7.2 MDS D100
- 7.3 MDS D117
- 7.4 MDS D124
- 7.5 MDS D126
- 7.6 MDS D127
- 7.7 MDS D139
- 7.8 MDS D160
- 7.9 MDS D165
- 7.10 MDS D200
- 7.11 MDS D261
- 7.12 MDS D324
- 7.13 MDS D339
- 7.14 MDS D400
- 7.15 MDS D421
- 7.16 MDS D422
- 7.17 MDS D423
- 7.18 MDS D424
- 7.19 MDS D425
- 7.20 MDS D426
- 7.21 MDS D428
- 7.22 MDS D460
- 7.23 MDS D521
- 7.24 MDS D522
- 7.25 MDS D522 special variant
- 7.26 MDS D524
- 7.27 MDS D525
- 7.28 MDS D526
- 7.29 MDS D528
- 7.30 MDS D560
- 8 System integration
- 9 System diagnostics
- A Appendix
Table of contents
SIMATIC RF200
6 System Manual, 03/2019, J31069-D0227-U001-A11-7619
6 Antennas ..............................................................................................................................191
6.1 ANT 1 .............................................................................................................................. 191
6.1.1 Characteristics ................................................................................................................. 191
6.1.2 Ordering data ................................................................................................................... 191
6.1.3 Flush-mounted in metal .................................................................................................... 192
6.1.4 Minimum clearances ........................................................................................................ 192
6.1.5 Technical specifications .................................................................................................... 194
6.1.6 Dimension drawing ........................................................................................................... 195
6.2 ANT 3 .............................................................................................................................. 196
6.2.1 Features........................................................................................................................... 196
6.2.2 Ordering data ................................................................................................................... 196
6.2.3 Mounting on/in metal ........................................................................................................ 197
6.2.4 Minimum spacing ............................................................................................................. 198
6.2.5 Technical data .................................................................................................................. 199
6.2.6 Dimension drawing ........................................................................................................... 200
6.3 ANT 3S ............................................................................................................................ 201
6.3.1 Features........................................................................................................................... 201
6.3.2 Ordering data ................................................................................................................... 201
6.3.3 Mounting on/in metal ........................................................................................................ 202
6.3.4 Minimum spacing ............................................................................................................. 203
6.3.5 Technical data .................................................................................................................. 204
6.3.6 Dimension drawing ........................................................................................................... 205
6.4 ANT 8 .............................................................................................................................. 206
6.4.1 Features........................................................................................................................... 206
6.4.2 Ordering data ................................................................................................................... 206
6.4.3 Transmission window ....................................................................................................... 207
6.4.4 Flush-mounted in metal .................................................................................................... 207
6.4.5 Minimum spacing ............................................................................................................. 208
6.4.6 Technical data .................................................................................................................. 209
6.4.7 Dimension drawing ........................................................................................................... 210
6.5 ANT 12............................................................................................................................. 211
6.5.1 Features........................................................................................................................... 211
6.5.2 Ordering data ................................................................................................................... 211
6.5.3 Transmission window ....................................................................................................... 212
6.5.4 Flush-mounted in metal .................................................................................................... 212
6.5.5 Minimum spacing ............................................................................................................. 213
6.5.6 Technical data .................................................................................................................. 214
6.5.7 Dimension drawing ........................................................................................................... 215
6.6 ANT 12 (stainless steel variant) ........................................................................................ 216
6.6.1 Features........................................................................................................................... 216
6.6.2 Ordering data ................................................................................................................... 216
6.6.3 Antenna connection.......................................................................................................... 217
6.6.4 Transmission window ....................................................................................................... 218
6.6.5 Flush-mounted in metal .................................................................................................... 219
6.6.6 Minimum spacing ............................................................................................................. 219
6.6.7 Technical data .................................................................................................................. 221
6.6.8 Dimension drawing ........................................................................................................... 222
6.7 ANT 18............................................................................................................................. 223
6.7.1 Features........................................................................................................................... 223