System Manual
Table Of Contents
- SIMATIC RF200
- Legal information
- Table of contents
- 1 Introduction
- 2 Safety notes
- 3 System overview
- 4 Planning the RF200 system
- 4.1 Fundamentals of application planning
- 4.1.1 Selection criteria for SIMATIC RF200 components
- 4.1.2 Transmission window and read/write distance
- 4.1.3 Width of the transmission window
- 4.1.4 Impact of secondary fields
- 4.1.5 Permissible directions of motion of the transponder
- 4.1.6 Operation in static and dynamic mode
- 4.1.7 Dwell time of the transponder
- 4.1.8 Communication between communication module, reader and transponder
- 4.2 Field data of transponders and readers
- 4.3 Installation guidelines
- 4.4 Chemical resistance of the reader and transponders
- 4.5 Further information
- 4.1 Fundamentals of application planning
- 5 Readers
- 5.1 SIMATIC RF210R
- 5.2 SIMATIC RF210M
- 5.3 SIMATIC RF220R
- 5.4 SIMATIC RF240R
- 5.5 SIMATIC RF250R
- 5.6 SIMATIC RF260R
- 5.7 SIMATIC RF280R
- 5.8 SIMATIC RF285R
- 5.9 SIMATIC RF290R
- 6 Antennas
- 7 Transponder
- 7.1 Memory configuration of ISO the transponders
- 7.2 MDS D100
- 7.3 MDS D117
- 7.4 MDS D124
- 7.5 MDS D126
- 7.6 MDS D127
- 7.7 MDS D139
- 7.8 MDS D160
- 7.9 MDS D165
- 7.10 MDS D200
- 7.11 MDS D261
- 7.12 MDS D324
- 7.13 MDS D339
- 7.14 MDS D400
- 7.15 MDS D421
- 7.16 MDS D422
- 7.17 MDS D423
- 7.18 MDS D424
- 7.19 MDS D425
- 7.20 MDS D426
- 7.21 MDS D428
- 7.22 MDS D460
- 7.23 MDS D521
- 7.24 MDS D522
- 7.25 MDS D522 special variant
- 7.26 MDS D524
- 7.27 MDS D525
- 7.28 MDS D526
- 7.29 MDS D528
- 7.30 MDS D560
- 8 System integration
- 9 System diagnostics
- A Appendix
Table of contents
SIMATIC RF200
8 System Manual, 03/2019, J31069-D0227-U001-A11-7619
6.13.2 Ordering data ................................................................................................................... 259
6.13.3 Transmission window ....................................................................................................... 260
6.13.4 Metal-free area ................................................................................................................. 261
6.13.5 Minimum distance ............................................................................................................ 261
6.13.6 Technical data .................................................................................................................. 262
6.13.7 Dimensional diagram ........................................................................................................ 263
6.14 ANT D10 .......................................................................................................................... 264
6.14.1 Features........................................................................................................................... 264
6.14.2 Ordering data ................................................................................................................... 264
6.14.3 Transmission window ....................................................................................................... 265
6.14.4 Metal-free area ................................................................................................................. 266
6.14.5 Minimum distance ............................................................................................................ 267
6.14.6 Technical data .................................................................................................................. 267
6.14.7 Dimensional diagram ........................................................................................................ 269
7 Transponder .........................................................................................................................271
7.1 Memory configuration of ISO the transponders ................................................................. 271
7.2 MDS D100 ....................................................................................................................... 272
7.2.1 Characteristics ................................................................................................................. 272
7.2.2 Ordering data ................................................................................................................... 273
7.2.3 Metal-free area ................................................................................................................. 273
7.2.4 Technical data .................................................................................................................. 275
7.2.5 Dimension drawing ........................................................................................................... 276
7.3 MDS D117 ....................................................................................................................... 277
7.3.1 Features........................................................................................................................... 277
7.3.2 Ordering data ................................................................................................................... 277
7.3.3 Mounting in metal ............................................................................................................. 277
7.3.4 Technical specifications .................................................................................................... 278
7.3.5 Dimension drawing ........................................................................................................... 279
7.4 MDS D124 ....................................................................................................................... 280
7.4.1 Characteristics ................................................................................................................. 280
7.4.2 Ordering data ................................................................................................................... 280
7.4.3 Mounting on metal ............................................................................................................ 281
7.4.4 Technical specifications .................................................................................................... 282
7.4.5 Using the MDS D124 in hazardous areas ......................................................................... 284
7.4.6 EC declaration of conformity according to directive 2014/34/EU MDS D124 ...................... 286
7.4.7 Dimension drawing ........................................................................................................... 286
7.5 MDS D126 ....................................................................................................................... 287
7.5.1 Characteristics ................................................................................................................. 287
7.5.2 Ordering data ................................................................................................................... 287
7.5.3 Mounting on metal ............................................................................................................ 288
7.5.4 Technical specifications .................................................................................................... 289
7.5.5 Dimension drawing ........................................................................................................... 290
7.6 MDS D127 ....................................................................................................................... 291
7.6.1 Features........................................................................................................................... 291
7.6.2 Ordering data ................................................................................................................... 291
7.6.3 Mounting in metal ............................................................................................................. 292
7.6.4 Technical specifications .................................................................................................... 293
7.6.5 Dimension drawing ........................................................................................................... 294