System Manual

Appendix
A.3 Connecting cable
SIMATIC RF300
System Manual, 07/2017, C79000-G8976-C345-07
437
Connecting cable with angled connector
Figure A-12 Connecting cable between ASM 456, RF160C, RF170C, RF180C and RF3xxR reader
(RS-422) with angled connector
Table A- 4 Ordering data
Length L
Article number
2 m
6GT2891-4JH20
5 m
6GT2891-4JH50
10 m 6GT2891-4JN10
The angled connector has a height of h = 29 mm and a length of l = 38 mm. Remember that
due to the construction, the distance between the edge of the connector and the edge of the
reader housing (H) is higher.
Figure A-13 Distance between connector edge and housing edge
The distance between the connector edge and the housing edge of the reader (H) depends
on the reader being used and can be up to 38 mm. If you look at the front of the reader, the
angled connector always points to the right and runs parallel to the housing.