User's Manual

Operation
5.1 The keypad
SIMATIC RF350M
38 Operating Instructions, 11/2015, C79000-G8976-C416-01
Turning the device off
Requirements: The mobile reader is battery-operated and the operating system is running.
Follow the steps below to turn the device off:
1. Press the On/Off button.
However, do not hold the button pressed down. The "Shutdown" dialog window is then
displayed on the screen of the device.
2. Press the Activator key. The system changes to the idle mode.
The "Shutdown" window provides more options than simply shutting down the device. The
default option changes the mobile reader to a status in which power consumption is at its
lowest (idle mode). The key sequence "On/Off button" and "Activator key" is adequate to turn
off the device.
Table 5- 2 Shutdown options of the reader
Options Description Remark
Sleep
1)
The device changes to the idle
mode. After exiting the idle mode, the
reader starts in the last active menu
entry before the On/Off button was
pressed.
Note 1:
The power management in the Con-
trol Panel influences the depth of the
idle mode. For more information,
refer to the section "Power Manage-
ment (PM) (Page 31)".
Note 2:
The device does not change to the
idle mode when it is in the docking
station.
Warm Boot
2)
The content of memory and unsaved
registry contents are retained (includ-
ing RAM memory). All unsaved data
in all running programs is lost.
Note 1:
The device retains all settings also
those that have not been saved.
Windows CE is simply restarted.
Note 2:
Some applications/functionalities
need to be restarted so that the new
settings are valid.
Note 3:
Do not reopen the PAK files.
Cold Boot The content of the RAM memory is
deleted and the device is reset to its
initial status. All unsaved registry
entries are lost.
Note 1:
Restart Windows CE and delete all
the settings that have not been
saved.
Note 2:
Open all PAK files.