User Manual

9.2.3 Assign texts
You can assign a text to the enthalpy calculator block.
Main menu > Commissioning > Settings > .... or
Main menu > Settings > Signal converter > Enthalpy calculator >
Operating line Range Factory setting
Enthalpy calculator
Max. 20 characters
Setting values
See Section 16.4 "Editable texts RMS705B" for an overview of all editable texts
and on h
ow to reset them.
9.2.4 Function check / wiring test
The inputs and outputs of the enthalpy calculator are displayed on the operator
unit.
Main menu > Signal converter > Enthalpy calculator >
D
isplay values
Operating lin
e Comment
Enthalpy A ---, kJ/kg
Absolute humidity A
---, g/kg
Dew point
---, °C
Wet bulb temperature
---, °C
Enthalpy B
---, kJ/kg
Absolute humidity B
---, g/kg
Enthalpy difference
---, kJ/kg
Temperature input A ---, °C
Relative humidity input A ---, %
Temperature input B ---, °C
Relative humidity input B ---,%
You can directly control the enthalpy calculator during the wiring test.
Main menu > Commissioning > Wiring test > Outputs >
Wirin
g test
Operating lin
e Comment
Enthalpy A
---, 0...100 %
Absolute humidity A ---, 0...100 %
Dew point ---, 0...100 %
Wet bulb temperature ---, 0...100 %
Enthalpy B ---, 0...100 %
Absolute humidity B ---, 0...100 %
Enthalpy difference ---, 0...100 %
133 / 216
Siemens Switching and monitoring device RMS705B CE1P3124en
Building Technologies Signal converter 01.04.2010