User Manual

192 / 216
Siemens Switching and monitoring device RMS705B CE1P3124en
Building Technologies Support for errors and faults 01.04.2010
Code no. Cause of error/fault Described in Section
6401 [Calculator 1] formula invalid See 6.5.5 "Calculator"
6402 [Calculator 2] formula invalid See 6.5.5 "Calculator"
7101…
7104
Fault extension module See 3.2.2 "Basic configuration"
9000 >1 fault input faulty
See 12.3 "Faults"
9001 [Fault inp 1] fault See 12.3 "Faults"
…
9020
[Fault inp 20] fault
See 12.3 "Faults"
9111 [Logger 1] on before cycle min See 6.2.4 "Event logger"
9112 [Logger 1] on after cycle max
See 6.2.4 "Event logger"
9113 [Logger 1] off before dur min
See 6.2.4 "Event logger"
9114 [Logger 1] off after dur max
See 6.2.4 "Event logger"
9121 [Logger 2] on before cycle min
See 6.2.4 "Event logger"
9122 [Logger 2] on after cycle max
See 6.2.4 "Event logger"
9123 [Logger 2] off before dur min
See 6.2.4 "Event logger"
9124 [Logger 2] off after dur max
See 6.2.4 "Event logger"
9131 [Logger 3] on before cycle min
See 6.2.4 "Event logger"
9132 [Logger 3] on after cycle max
See 6.2.4 "Event logger"
9133 [Logger 3] off before dur min
See 6.2.4 "Event logger"
9134 [Logger 3] off after dur max
See 6.2.4 "Event logger"
9141 [Logger 4] on before cycle min
See 6.2.4 "Event logger"
9142 [Logger 4] on after cycle max
See 6.2.4 "Event logger"
9143 [Logger 4] off before dur min
See 6.2.4 "Event logger"
9144 [Logger 4] off after dur max
See 6.2.4 "Event logger"