User Manual

205 / 216

Siemens Switching and monitoring device RMS705B CE1P3124en

Building Technologies Appendix 01.04.2010

Universal controller

(Section 11)

Configuration Functions

 Main controlled variable

 Differential input

 Universal shift

 General limiter

 Input setpoint changeover

 Start condition

 Sequence outputs

3 universal controllers, can be used as a P, PI or PID controller.

 Differential control possible.

 Universal shift for setpoints.

 Min./max limitation function.

 Connection of remote setpoint adjuster.

 Controller can be enabled via start input.

 1 heating sequence S1, (\_); 1 cooling sequence S4, (_/).

 A name can be assigned to each controller.

Faults

(Section 12)

Configuration Functions

Faults

 Fault button external

 Fault input 1 to 20

 Fault relay 1 and 2

 20 universal fault signal inputs, "Fault status message delay, Fault

acknowledgement" (none, acknowledge), "Fault priority" (urgent, not

urgent).

 2 fault relays, priority (urgent, not urgent, all) and signaling can be set.

 Direct connection possible for analog signals and settable threshold

values.

 A name can be assigned to each fault input.