User Manual

5.2 Analog inputs

See Section 5.1.1 for activating analog inputs.

You can enter the following settings for analog inputs: Type, Measured range,

Correction.

5.2.1 Type

You can select "Type" if the unit is °C (identifier °C and outside temperature). The

following types are available:

Ni1000*

2xNi1000*

Pt1000

DC 0...10 V

* Physically, the sensing element types LG-Ni1000, 2x LG-Ni1000 must be used (see Section 5.2.2).

Main menu > Commissioning > Settings > .... or

Main menu > Settings > Inputs > ...X...

Setting values

Operating line Range Factory setting

Type Ni1000, 2xNi1000, T1,

Pt1000, 0…10 V

Ni1000

Note

s 

If the unit is not °C, the "Type" is always DC 0...10 V.

 Physically, the sensing element types LG-Ni1000, 2x LG-Ni1000 must be used

(see Section 5.2.2).

31 / 216

Siemens Switching and monitoring device RMS705B CE1P3124en

Building Technologies Inputs 01.04.2010