User Manual

6.2.2 Event logger settings
Main menu > Commissioning > Settings > .... or
Main menu > Settings > Data acquisition > Event logger > Event logger 1...4 >
Setting values
Operating line Range Factory setting
Event logger 1…4 Max. 20 characters Event logger
1…4
Limit value on Depending on selected type. Type-dependent
Limit value off Depending on selected type. Type-dependent
Event duration min** 00.00..23.50 h.m 00.00 h.m
Event duration max** 00.00..23.50 h.m 00.00 h.m
Event cycle min** 0...720 h 0 h
Event cycle max** 0...720 h 0 h
Fault priority Urgent, Not urgent Not urgent
Geographical zone
(apartment)
1…126 (relevant for "Room
temp via bus")
1
Geographical zone (room) 1…63 (relevant for "Room temp
via bus")
1
Outside temperature zone 1…31 (relevant for "Outside
temp via bus")
1
* A name can be assigned to the event logger inputs.
** Set the times to 0 to deactivate the individual fault messages.
6.2.3 Event logger display
 You can query the last 10 event periods on the display.
 They are sorted in chronological order with 1 as the most recent entry.
 The data of the event start and end as well as duration for highest or lowest
values are displayed as increment key.
 The oldest event is deleted if there are more than 10 events.
Main menu > Data acquisition > Event logger 1..4 >
D
isplay values
ON
18.06.2005 00:00
30.06.2005 23:59
40.0°C
18.06.2005 ... 18.06.2005 ... 18.06.2005 ...
19.06.2005 ...
25.0°C 36.8°C 36.8°C
Limit value off
Sa
Maximum
Event logger 1
Entr
y
1Entr
y
1Entr
y
1Entr
y
1
Mo Mo Mo
Maximum Maximum Maximum
You can delete event logger entries at the password level.
Main menu > Commissioning > Settings > Data acquisition > Event logger > Event logger
1...4 >
Delete entries
Operating lin
e Range Factory setting
Delete logger No, Yes No
47 / 216
Siemens Switching and monitoring device RMS705B CE1P3124en
Building Technologies Data acquisition 01.04.2010