User Manual

6.4.6 Display meter readings
The current meter reading, the date and the reading of the last 15 months are
displayed.
Main menu > Data acquisition > Meter 1...4 >
D
isplay values
Operating lin
e Comment
Meter reading current 0…999'999’999
Unit As per the configured display format.
[Readout 1] date
[Readout 1] meter reading
…
[Readout 15] date
[Readout 15] meter reading
 The listed operating lines also exist for meters 2 to 4.
Note
s

The monthly values are stored at midnight at the end of the month.
 The 15 monthly values can be deleted at the password level via operating line
"Reset monthly values".
6.4.7 Assign texts
A specific text can be assigned to each meter. This text is displayed as menu and
operating line text on the operating pages.
Main menu > Commissioning > Settings … or
Free text
Main menu > Settings > Data acquisition > Meter > Meter 1...4 >
Operating line Range Factory setting
Meter 1…4 Max. 20 characters Meter 1…4
See Section 16.4 "Editable texts RMS705B" for an overview of all editable texts
and on h
ow to reset them.
6.4.8 Troubleshooting
Some battery-powered or mechanical meters continue metering in the event of a
power failure. During a power failure affecting RMS705B, the pulses are not
counted.
A restart occurs after you exit menu "Extra configuration". Pulses received between
the last storage operation and restart (max. 5 minutes) are not counted.
54 / 216
Siemens Switching and monitoring device RMS705B CE1P3124en
Building Technologies Data acquisition 01.04.2010