Assortment / System Description

16
1 Strip the wire over a length of 7…8 mm 2 Push on the spring cage terminal with a screwdriver
and, at the same time, insert the wire
The terminal base is fitted to a mounting rail conforming to EN 60715-TH 35-7.5 or
is screwed to a flat surface.
Symbol Meaning Symbol Meaning
Info pages/setting pages Function block navigation
Info pages D1, D2 Digital inputs D1 and D2
Access levels X1…X5 Analog inputs X1…X5
No symb. User level
1
Controllers 1 and 2
SERVICE
Service level
MODE
Operating mode
PASS
Password level Frost protection
Lock access Pump
Menus Analog output
COMMIS
Commissioning Mixed air damper/heat recovery
APPL ID
Basic configuration Step switch
Inputs, outputs 3P 3-position output
CONF
Extra configuration SET Adjustable value
PARA
Parameter Function block instances
Wiring test 1 Instance 1
SET
Setpoints 2 Instance 2
Measuring variables, operating modes 3 Instance 3
Outside temperature LIN Linear step switch
Room temperature BIN Binary step switch
Supply air temperature Units
Fault °F Degrees Fahrenheit
Room operating mode Comfort °C Degrees Celsius
Room operating mode Economy K Kelvin
Protection % Percent
Spring cage terminals
Installation
Display
Display symbols
3140Z13