Assortment / System Description

Controls RM..

Synco 700 controls RM.. contain programmed applications that can be straight-

forwardly activated. For the free configuration of new customized applications,

basic types in accordance with the basic device functions are available. The

devices can be easily and efficiently installed and commissioned.

The controls consist of terminal base and electronics section which plugs into the

terminal base. Integrated in the terminal base is the connection facility (electrical

and mechanical) for the extension module.

3144Z01

45 67 8 5 10

Connection facility for service tool OCI700.1

Connection facility for operator unit RMZ790

LED "Run" (green) for indication of

operating state (power on, no fault)

Button "

" with LED (red) for fault indication

and acknowledgement

Opening for plug-in type operator unit

RMZ790

Button "Prog" for changing between normal

and addressing mode

LED "Prog" to indicate addressing mode

(adoption of physical KNX device address)

Catch for fitting the device to a rail

Fixing facility for cable tie

Connection facility for extension module

Rest for terminal cover

Mounting and installation

The controls and extension modules are designed for …

• mounting in a control panel (front or rear),

• fitting to a standard mounting rail as per EN 60715-TH 35-7.5,

• wall mounting with 2 fixing screws.

Controls with an attached RMZ790 operator unit can be mounted in a control panel

such that when the control panel door is closed, the unit protrudes through the

cutout, giving the plant operator access to the display and the operating elements.

RMZ780

3110Z25

Note: In place of the attachable RMZ790 operator unit it is also possible to use the handheld operator

unit RMZ791.

Brief description

Basic design

Mounting

Control panel