Assortment / System Description
61
Bus operator unit RMZ792 series B
The RMZ792 operator unit of the B-series (see Data Sheet N3113) is used to
control from a remote location Synco 700 controls, central communication units,
RX.. room controllers and RD.. room thermostats in a KNX network. Basic design
and dimensions are identical to the RMZ791 operator unit.
The RMZ792 bus operator unit can be installed in a control panel or can be used
as a handheld device. During mobile use, the unit is powered via the KNX bus.
When installed in a control panel, it operates on AC 24 V.
• Same operating philosophy as operator units RMZ790 and RMZ791
• Supports all languages used with the Synco 700 controls
• Info, user, service and password level, whereby user, service and password
level have optional password protection
• Automatic device search run to find the bus devices on the KNX network
• Creation of customized device lists, e.g. with access to heating plant (plant
view), or a certain building (building view)
• Device list: Automatic or manual sorting. Naming/renaming devices. Removal of
individual devices from the list. Deletion of entire device list
• Up to 20 favorite pages with the most important plant and process values can be
freely defined (maximum 10 per page). Sorting or deletion of favorite pages
• Fault indication: Red, illuminated button and an alarm bell symbol on the display
• List of the 20 current faults
• Fault acknowledgement by pressing the acknowledgement button
• User-defined business card for service address/telephone
Note: Configuration and commissioning of Synco devices with the RMZ792 bus operator unit are
not possible on KNX networks.
The RMZ792 bus operator unit of the B-series always comes with the languages
currently available, including the Device Descriptions.
To operate new units in the future, a replacement unit S/RMZ792 can be ordered.
The bus operator unit allows for remote control of up to 150 devices via KNX.
Access is made possible via the device list.
Replacement unit
S/RMZ792
Remote control with
RMZ792