Assortment / System Description

75
Synco living
Central apartment unit
The QAX9.. central apartment unit is the heart and brain of the system. From
the central unit, all functions can be conveniently controlled and checked on
the display.
Room unit
The room unit acquires the room temperature and enables the user to indi-
vidually change settings predefined by the central apartment unit (setpoints
or operating mode). Comfort mode can be extended at the touch of a button.
Room temperature sensor
The sensor acquires the room temperature and sends the respective signal
wirelessly to the central apartment unit.
Heating circuit controller
The controller receives via RF link the setpoints and actual values of each
room from the central apartment unit, compares them, and ensures control to
the required room temperature by adjusting the valves of the heat distributor.
Multicontroller
The multicontroller is used to provide precontrol of up to 2 room groups or
control of a ventilation plant with up to 3 stages.
Meteo sensor
The meteo sensor acquires the outside temperature and the atmospheric
pressure.
Radiator control actuator
RF-driven control actuator for radiator valves. The built-in sensor acquires
the room temperature and compares it with the setpoint transmitted by the
central apartment unit via RF. If there is a deviation, the radiator valve
ensures control to the required room temperature. Silent mode (e.g. for
use in sleeping rooms).
Consumption data interface
Acquisition of data of the various meters (heat/cooling energy, hot/chilled
water, electricity, gas, incl. set day and monthly values) and wireless
transmission to the QAX903 or QAX913 central apartment unit.
RF links for lights and blinds
To control lights and blinds via RF link – centrally, locally in the room, or as a
scene.
Handheld transmitter
For remote control of the QAX913 central apartment unit via KNX RF. A
multicolor LED indicates the operating state and confirmation feedback
messages received from the central apartment unit.
Door/window contact
The door/window contact checks if doors and windows are closed.
Water monitor
The wireless sensor detects water on the floor of wet rooms (e.g. kitchen,
bathroom, laundry). It then enables the central apartment unit to auto-
matically close the main shutoff valve, to activate a horn, or to send an
alarm to a PC or mobile phone via the web.
Smoke detector
The smoke detector detects the smoke produced by fire and sets off an
alarm.
Overview
Synco living products