Assortment / System Description

Engineering tool software, ETS Professional

Communication between Synco devices takes place in LTE mode via LTE data

points.

Communication between Synco devices and third-party KNX devices is executed

in S-mode via S-mode data points. In the Synco devices, the S-mode data points

correspond to a subset of the LTE data points.

The S-mode data points of the current Synco devices are available for downloading

from Siemens Building Technologies as an import file for ETS Professional.

The S-mode data points are to be configured in ETS Professional. The tool can be

ordered with the KNX Association: http://www.knx.org/

The top section of the screen shows that for the Synco living central apartment unit

QAX913, the parameters for "Switching groups [1...8]" are selected and set for

"Switching group 1: Function"  "Blind".

Resulting from parameter setting "Switching group 1: Function"  "Blind", the

bottom section of the screen shows the following S-mode data points (in ETS

"Device objects"):

36 [Switching group 1] Blind Up/Down Object function: Transmit

37 [Switching group 1] Blind Step/Stop Object function: Transmit

39 [Switching group 1] Trigger Up/Down Object function: Receive

Note: The data point numbers 1...8 comprise the general S-mode data points, contained

in every KNX Synco device.

LTE mode data points

S-mode data points

Engineering Tool

Software, ETS

Example:

Tool interface ETS4