Basic Documentation

15/332
Siemens Universal controllers RMU710B, RMU720B, RMU730B CE1P3150en
Building Technologies Summary 03.10.2011
1.7 Important notes
This symbol draws your attention to special safety notes and warnings. Failure to
observe such notes may result in personal injury and / or considerable damage to
property.
Synco™ 700 products may only be used for control and supervision of heating,
ventilation, air conditioning and chilled water plants.
Prerequisites for flawless and safe operation of Synco™ 700 products are proper
transport, installation and commissioning as well as correct operation.
Fuses, switches, wiring and earthing must comply with local safety regulations for
electrical installations.
Preparation for use and commissioning of Synco™ 700 products must be
undertaken by qualified staff trained by Siemens Building Technologies.
Synco™ 700 products may only be operated by staff instructed by Siemens
Building Technologies or its delegates and who understand the potential risks.
When wiring the system, strictly segregate the AC 230 V section from the AC 24 V
safety extra-low voltage (SELV) section to ensure protection against electric shock
hazard!
The limit values listed in the data sheet apply for storage and transport (under
"Environmental conditions" in the technical data).
If in doubt, contact your supplier or Siemens Building Technologies.
Synco™ 700 products are maintenance-free and only require regular cleaning.
Keep free of dust and dirt any system sections in the control panel whenever
normal service visits are due.
Should system faults occur and you are not authorized to make diagnostics and to
rectify faults, call SBT service staff.
Only authorized staff are permitted to diagnostics, correct faults and restart the
plant. This applies as well to work carried out within the panel (e.g. safety checks
or replacement of fuses).
Do not dispose of the products as domestic waste as they contain electrical and
electronic components.
Observe all local, applicable laws.
Field of use
Intended use
Electrical installation
Commissioning
Operation
Wiring
Storage and transport
Maintenance
Faults
Disposal