Basic Documentation

18/332
Siemens Universal controllers RMU710B, RMU720B, RMU730B CE1P3150en
Building Technologies Operation 03.10.2011
Wednesday 02.04.07 14:52
Welcome
Information
Main menu »
Start page
Main menu
Time switch...
Room operating mode…
Controller 1…
Controller 2…
Setting level:
Select setting parameters
e.g. on the main menu of the user level
Entry 1
Start: ––.––.–– ––.––
End: ––.––.–– ––.––
Reason: Holidays.
Delete entry...
Setting level:
Pop-up, setting a numerical value
Main me > Controller 1
Current supply air temp setpoint:
304
Setting level:
Help display: Explanation of selection setting
parameters. The menu Text-ID number or
setting parameters is displayed in the lower
right-hand corner
Room operating mode
1-6
Preselection:
State: Comf
Cause: Time switch
Information level:
"Display of important plant data" (picture 1 of 6)
2.2.3 Operating levels
There are 2 operating levels:
 Info level
 Setting level
These 2 levels are always active regardless of the access level used.
Important plant data can be queried in this level.
The setting level is set up as a menu. It provides for reading and adjustment of
operating lines.
The INFO button queries menu explanations on the individual operating lines.
The information is displayed as long as the button is depressed.
 Switching from the info level to the setting level:
1. Select the start page by pressing the ESC button
2. Press the OK knob to change to the setting level
 Switching from the setting level to the info level:
1. Select the start page with the ESC button. Press the button repeatedly until
the start page reappears
2. Press the INFO button to change to the info level
Display examples
Info level
Setting level
Switching between the
operating levels
25.02