Basic Documentation

29/332
Siemens Universal controllers RMU710B, RMU720B, RMU730B CE1P3150en
Building Technologies Commissioning 03.10.2011
4.8 Device information
The "Device information" menu provides the following controller information:
Main menu > Device information > Controller
Operating line Comments
Plant type e.g. A01
Plant type adapted Standard application or changed standard application
File e.g. AEFB01 U3B HQ
Device type e.g. RMU730B-1
Software version Of the controller
Hardware version Of the controller
Meaning:
Plant type Display of the plant type loaded (e.g. A01)
File Here, the file name of the application is displayed
(e.g. AEFB01 U3B HQ)
Main menu > Device information > Position 1…4
Operating line Comments
Extension module Display of the module’s type reference
Software version Of the extension module
Hardware version Of the extension module
4.9 Mark an intervention
If the internal standard application has been adapted or, if, subsequently, menu
"Extra configuration" has been accessed, an asterisk is placed in front of the plant
type’s type reference.
The asterisk is set automatically when leaving the "Extra configuration" menu, even
if nothing has been changed. In addition, on operating line "Plant type changed" of
the "Device information" menu, the value is set to "Yes".
The asterisk is deleted and the value "No" appears on operating line "Plant type
changed" when, on the "Basic configuration" menu, the old or a new standard
application is loaded as the plant type. A new configuration is made based on the
selected application.
Display values
Example
Mark
Reset the marking