User Manual

ManualsBrandsSiemens ManualsControl rangesOperator unit RMZ791

CE1N3112en

2018-03-15

Building Technologies

112

Synco™ 700

Operator Unit

RMZ791

Operator unit for use with Synco™ 700 controllers, Central Control Unit and

Switching and Monitoring Device

Use

The RMZ791 operator unit has been designed for use with the following controllers,

Central Control Unit and Switching and Monitoring Device:

· Heating controllers RMH7…, RMK7…

· Universal controllers RMU7…

· Central Control Unit RMB795…

· Switching and Monitoring Device RMS705…

These types do not have an operating facility of their own.

Functions

The operator unit is used to make all controller settings and to display all data required

in connection with the controller. All entries made on the operator unit are transmitted

to the controller where they are handled and stored; the operator unit itself does not

store any data. The information required by the user is generated by the controller and

delivered to the operator unit for display.

Summary of content (6 pages)

PAGE 1
3 112 Synco™ 700 Operator Unit RMZ791 Operator unit for use with Synco™ 700 controllers, Central Control Unit and Switching and Monitoring Device Use The RMZ791 operator unit has been designed for use with the following controllers, Central Control Unit and Switching and Monitoring Device: · Heating controllers RMH7…, RMK7… · Universal controllers RMU7… · Central Control Unit RMB795… · Switching and Monitoring Device RMS705… These types do not have an operating facility of their own.
PAGE 2
Ordering and delivery When ordering, please give quantity, name and type reference. The scope of delivery consists of operator unit, connecting cable and set of screws.
PAGE 3
On the software side, all settings and readout values are arranged as data points of a menu tree. Using the operating elements, every data point can be selected, displayed or set. All menus appear on the LCD as plain text. The controller has several languages preprogrammed; when commissioning the controller, the required language is to be activated. The controller i s supplied complete with Operating instructions; they contain all languages stored in the controller.
PAGE 4
Mounting notes Mounting methods Suitable mounting location is a front (control panel front or control desk). 3112Z06 min. 105 mm 44...65 mm The operator unit is fitted to the control panel front; the controller is mounted inside the control panel. For the introduction of the connecting cable, the control panel front must have an opening of about 30 mm diameter. 3112Z07 min. 105 mm 44...65 mm The operator unit is fitted in a control panel cutout (for dimensions of cutout, refer to “Dimensions”).
PAGE 5
Technical data Degrees of protection Housing Safety class Product standard Product family standard Electromagnetic compatibility IP 20 to EN 60 529 III to EN 60730-1 EN 60730-1 Automatic electrical controls for household and similar use EN 50491-x General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) For residential, commercial and industrial environment CE1T3110xx *) CE1T3110en_C1 *) Eurasia conformity EU Conformity (CE) RCM Conformity E
PAGE 6
3112M01 Dimensions 96 Operating unit 145 34 128 Drilling template for front mounting 2,2 40 12 9,5 19 73 20 3112M02 30 138 +1 0 RMH760, RMU7... 173 > 200 Published by: Siemens Switzerland Ltd. Building Technologies Division International Headquarters Gubelstrasse 22 6301 Zug Switzerland Tel. +41 58-724 24 24 www.siemens.com/buildingtechnologies 3112M05 37 5.3 92 +0.