User Manual

‘S-HQ’ Notification Appliances 2586
s Industry, Inc.
Building Technologies Division
s
Data Sheet
Fire Safety Products
Notification Appliances
S-HQ – 8” Supervised Speakers and Speaker Strobes
Application:
I
ndoor
Product Overview
– High-efficiency design for maximum output at minimum wattage across a frequency range of 400 to 4000Hz
– S-HQ 8-Inch Speakers / Speaker-Strobes are designed for multiple power requirements
with high dBA output at each power tap, and offers a choice of field selectable taps:
 1/4W to 8W for either 25.0VRMS or 70.0VRMS audio systems
– S-HQ 8-Inch Speaker portion has field-selectable taps from 1/8W to 8W for 25 or 70 VRMS operation
– The strobes portion of the Series ‘S-HQ’ appliances can be synchronized when used with any of the following:
 50-point, 252 / 504-point addressable fire-safety systems
 FireFinder® XLS control panels
 Siemens Dual-Sync Control Modules -> Model DSC-series with built-in sync protocol
 Siemens PAD-series of NAC Extenders
– Siemens Series ‘S-HQ’ meets the requirement for low-frequency signal tone
[
as described in the section for Determination of Low Frequency Signal Format
in the Standard for Audible Signal Appliances, per UL464] when used with:
 One (1) Amplifier Card {Model VCI2001-U1} with Siemens 252-point / 504-point addressable FACPs
 One (1) Booster Amplifier {Model EBA200x Series} with Siemens 252-point / 504-point addressable FACPs
 One (1) 40W Zone Amplifier Card {Model ZAC-40} with FireFinder® XLSV
– Fast installation with In / Out screw terminals using
#
12 to
#
18 AWG wires
– Ceiling-mount models are available with field-selectable Candela settings of 15/30/75/95cd
 Speaker impedance: 8 ohms (Ω)
– Round, metal 12-inch grille with white, powder-coated finish
 Magnet weight: 9.5 oz. (269g.)
– Compatible with DC circuit supervision
– ADA / NFPA / ANSI compliant
– Complies with OSHA 29 Part 1910.165
– UL Listed & ULC Listed;
CSFM (
#
7320-0067:0243 and
#
7320-0067:0255) Approved
Specifications
– Speaker appliances shall be Siemens Series ‘S-HQ’ Speakers and speaker / strobe appliances
shall be Siemens Series S-HQ Speaker Strobes or approved equals
– Speakers shall be
UL Listed for indoor use under Standard 1480 for Fire Protective Service, and
speakers equipped with strobes shall be listed for indoor use under
UL Standard 1971 for:
Emergency Devices for the Hearing-Impaired
 Speaker with strobes shall be certified to meet the requirements of FCC Part 15, `Class B’
S-HQ-MC-CW
Speaker Strobe
S-HQ-W
Speaker