Specifications

Getting Started with an S7-200 Programming System

3-3

S7-200 Programmable Controller System Manual

C79000-G7076-C233-01

3.2 Quick Start for STEP 7-Micro/WIN 32

Pre-Installation Instructions

Before running the setup procedure, do the following:

S If a previous version of STEP 7-Micro/WIN 32 is installed, back up all

STEP 7-Micro/WIN projects to diskette.

S Make sure all applications are closed, including the Microsoft Office toolbar.

S Be sure the cable between your personal computer and the CPU is connected.

See Section 3.3 for instructions.

Installing STEP 7-Micro/WIN 32

Use the following procedure to install the STEP 7-Micro/WIN 32 software:

1. Start by inserting the CD or disk in the CD or disk drive of your computer.

2. Click once on the “Start” button to open the Windows menu.

3. Click on the Run... menu item.

4. If you are installing from a:

disk: In the Run dialog box, type a:\setup and click on OK or press ENTER. This

starts the setup procedure.

CD: In the Run dialog box, type e:\setup and click on OK or press ENTER. This

starts the setup procedure.

5. Follow the online setup procedure to complete the installation.

6. At the end of the installation, the Setting the PG/PC Interface dialog box

appears automatically. Click “Cancel” to bring up the main

STEP 7-Micro/WIN 32 window. See Figure 3-1.

Review the README

.TXT file included on your CD or diskettes for the most

recent information about STEP 7-Micro/WIN 32. (In the

position, the letter

A = German, B = English, C = French, D = Spanish, E = Italian.)