Specifications

Index
Index-7
S7-200 Programmable Controller System Manual
C79000-G7076-C233-01
operation with Reset and Start, 9-29
operation with Reset and without Start,
9-28
I/O numbering, 6-2, 6-3
increment, 9-80, 10-23
Interrupt Routine instructions, 9-174
Invert, 9-115–9-117
Jump to Label, 9-144–9-146
Last-In-First-Out, 9-109
logic stack, 9-194–9-196
loop control (PID), 9-94–9-96
math, 9-77, 9-83, 10-21
memory fill, 9-103–9-105
move and swap, 9-102–9-104, 10-25–10-27
MPI card with master/slave, 7-4
Network Read/Network Write, 9-178–9-180
on-delay timer, 9-20, 9-21, 10-13, 10-14
output instructions, 9-9, 10-5
Pulse Train Output, 9-65, 9-68
Pulse width modulation, 9-63
Real number conversion instruction, 9-130,
10-36
retentive on-delay timer, 9-22
Segment, 9-134
Sequence Control Relay, 9-155–9-160
conditional transitions, 9-162
convergence control, 9-159–9-162
divergence control, 9-157
set up timed interrupt, 4-18
shift and rotate, 9-122–9-124, 10-31–10-33
shift register bit, 9-125–9-127
Stop, End, and Watchdog Reset,
9-143–9-145
Table Find, 9-107
TD 200s added to network, 7-12
transmit instructions, 9-189
Truncate, 9-130, 10-36
Exclusive Or Byte instruction, 9-110
Exclusive Or Double Word instruction, 9-112
Exclusive Or instruction, 10-26
Exclusive Or Word instruction, 9-111
Execution times, STL instructions, F-1
Expansion cable, specifications and
installation, A-29
Expansion modules, 1-4, 1-5
addressing I/O points, 6-2
dimensions
8- and 16-point I/O modules, 2-5
CPU 221, 2-4
CPU 222, 2-4
CPU 224, 2-5
screw sizes for installation, 2-4–2-6
flexible ribbon cable, 1-5
ID and error register (SMB8 to SMB21),
C-5
installation procedure
panel, 2-6
rail, 2-7
removing the bus expansion port
connector, 2-6–2-8
order numbers, E-1
power requirements, 2-18
removal procedure, 2-8
screw sizes for installation, 2-4–2-6
terminal block connector, 2-12
F
Factory Mutual Research, A-2
Fatal errors, B-2
and CPU operation, 4-37
Field wiring
installation procedure, 2-9
optional connector, 2-11
wire sizes, 2-9
Fill instructions
example, 9-103–9-105
Memory Fill, 9-103
Find instructions, 9-104–9-109
Add to Table, 9-104
First-In-First-Out, 9-108
Last-In-First-Out, 9-109
Table Find, 9-106
First-In-First-Out instruction, 9-108
Flexible ribbon cable, expansion module, 1-5
Floating-point values, loop control, 9-89
Floating-point values, representing, 5-4