Environmental Declaration

EPD - Type II
Based on ISO 14021
Building Parts
EMI DAC
External Modbus Interface for damper actuators
EMI VAC External Modbus Interface for valve actuators
EMI DAC with M12 connector - A5W00026050
External Modbus Interface for damper actuators
EMI DAC with M12 connector - A5W00044432
External Modbus Interface for damper actuators
EMI DAC with M12 connector - A5W00062041
External Modbus Interface for damper actuators
Product line, product range
Siemens Schweiz AG
Building Technologies Division
Theilerstrasse 1a
CH-6300 Zug
Management System since by
ISO 9001 (Quality) 22.07.1986 SQS
ISO 14001 (Environment) 20.10.1998 SQS
Typical energy consumption 4kWh/a
Maintenance
Fire load variant *) see below
Total weight of device variant *) see below
The total weight of a device may deviate from the total of the weights of all individual components due to rounding.
ABS+PC; low-halogen EMI Upper Housing 20g
ABS+PC; low-halogen EMI Lower Housing 21g
PVC (H)05V2V2-F Cable / Wire variant
PVC (H)05V2V2-F Cable / Wire variant
PUR/PVC Cable / Wire PUR variant
FR4; low-halogen; solder SnAgCu PCBA 11g
Materials
PCBAs (Printed Circuit Board
assembled)
Others
External Modbus Interface for damper and valve actuators
Environmental
Product Declaration
Type of equipment /
Product No.
Not necessary
None
Environmentally compatible
product design
Process control
Product responsibility of Siemens covers the entire product life cycle. Siemens already assesses, avoids and minimizes
the environmental impact of its products with respect to production, procurement, sales, use, services and disposal during
the product and process planning phases by complying with Siemens EP Standard (former SN 36350) "Specifications on
Environmentally Compatible Product and System Design".
Product use
Plastics
Product
Restricted Page 1/2