Installation manual

LITE SYSTEM INSTALLATION AND SUPERVISOR GUIDE 9.0 VER. 1

system by attaching a portable diskette drive to the Lite system unit. Therefore, we

strongly recommended that technicians servicing Lite system units have access to a

portable diskette drive.

• Authorization key (Small Office Lite systems only)

The Small Office Lite system runs only if the authorization key is attached to the

PC’s parallel port. This key is shipped in the packaging with the Lite system unit.

To attach the authorization key, simply plug the key into the parallel port in the back

of the PC. (Debut units do not require an authorization key.)

Authorization Key

If you choose to set up the system by connecting a laptop to the Lite system unit, you need

the following additional equipment:

• Laptop computer

• Null modem serial cable

• KeyLink communications software (provided with the Lite system)

This additional equipment is necessary because the Lite system does not have a keyboard and

monitor. To set up the system using a laptop, you must use a null modem serial cable to

attach the laptop PC to the Lite system unit. So that the laptop computer can communicate

with the Lite system unit, you must install KeyLink communication software, provided with

the Lite system, onto the laptop PC. The KeyLink installation procedure is provided in this

document.