Installation manual

LITE SYSTEM INSTALLATION AND SUPERVISOR GUIDE 9.0 VER. 1
24
6. The system warns that it may over-write some changes to the Lite system database. To
continue, press <Y>.
7. At the system prompt for the number of digits in the extension numbers, enter the
appropriate number, then press <Enter>. At the system prompt to confirm your entry,
press <Enter>.
8. A list of telephone systems displays. Note that you can use the <PgUp> and <PgDn>
keys to scroll through all available selections. Enter the number corresponding to the
telephone system with which you are working, then press <Enter>. If the phone system
is not on the list, select option 0 DON’T KNOW (OR UNLISTED) then press <Enter>.
9. The system prompts you to confirm your selection. To continue, press <Y>.
10. At the system prompt regarding message waiting lights, press <Y>.
11. The system prompts you to indicate the number of telephone lines connected to the Lite
system. Enter the appropriate number, then press <Enter>.
12. The system prompts you for the number of digits you want to use in mailbox passwords.
Indicate the number of digits subscribers are to use, then press <Enter>. (You may want
to consult the system supervisor, in case he/she has a digit-length preference.)
13. The system prompts you to confirm your selection. To continue, press <Y>.
14. The system prompts you to automatically create mailboxes at this point. Though you
may elect to create mailboxes now, we strongly recommend that you select No, so
you can first make any necessary modifications to the prototype mailbox, which
serves as a template for creating mailboxes. By properly setting up the prototype
mailbox, you simplify the number of adjustments you must make to refine the mailboxes
for each user. To continue without setting up mailboxes at this time, press <N>.
15. Depending on the phone system you selected, you may be prompted for additional
information. Enter the appropriate responses.
16. The system prompts you to use U.S. Daylight-Savings Time. To have the system
automatically adjust the clock so it accommodates Daylight-Savings Time for the next 10
years, press <Y>. If you do not want the system to automatically adjust for U.S.
Daylight-Savings Time, press <N>.
17. The main Install program screen displays. To continue, select Exit then press <Enter>.