Installation manual

LITE SYSTEM INSTALLATION AND SUPERVISOR GUIDE 9.0 VER. 1
29
3. From the Main Menu, select SYSTEM INFORMATION. The System Information menu
displays.
2.5.5.4 Setting Up the General Information Screen
1. From the System Information menu, select GENERAL. The General Information setup
screen displays.
2. Press <Enter> to move the cursor to the AUTOMATICALLY EXIT TO DOS AT field. Enter
the time at which the Lite system should exit to DOS to perform its auditing functions.
The default setting is 3:00 AM.
3. To save the information and exit the screen, press <F10>. The System Information
menu displays.
2.5.5.5 Setting Up the Line Information Screen
1. From the System Information menu, select LINE INFORMATION. The Line Information
setup screen displays. Each row on this screen corresponds to one line connected to the
Lite system.
2. Press <Enter> to move the cursor to the Initial Box field under Day Service for line 1.
Verify that 800 displays in this field, indicating that calls received during Day Service
hours are to go to Routing box 800.
3. Press <Enter> to move the cursor to Initial Box field under Night Service for line 1.
Verify that 801 displays in this field, indicating that calls received after the day service
hours are to go to Routing box 801.
4. Press <Enter> to move the cursor to the Initial Box field under Lunch Service for line 1.
Verify that 800 displays in this field, indicating that calls received during Lunch Service
are also to go to Routing box 800.
5. Press <Enter> to move the cursor to the OUTGOING ALLOWED field for line 1. Verify
this field is set to No.
6. Repeat steps 3 through 5 for each line on the screen. For the last line, however, be sure to
verify that Yes in the OUTGOING ALLOWED field.