Installation manual

LITE SYSTEM INSTALLATION AND SUPERVISOR GUIDE 9.0 VER. 1

ENABLED

Set this field to Yes to indicate that the pager feature for this mailbox is currently on. Set

the field to No to indicate that the pager feature is off. The mailbox owner can also

toggle this field on and off by calling into the system. If this field is set to No, it

overrides the call schedule set in the previous field.

5. Press <Enter> to move the cursor to the first MESSAGE DELIVERY field. If the subscriber

is to use the Message Delivery feature, use the following information to complete this

section of the Mail Box setup screen.

CALL

Enter the telephone number the Lite system should call to inform the mailbox owner that

there are new messages in his/her mailbox.

The number can contain the DTMF digits 0 - 9, * and #, plus any of the following special

characters:

Character Use

P Use pulse (also known as ‘rotary’) dialing.

T Use tone dialing (the default).

, Short pause (duration can be changed in Technical Information screen.

Default is 1 second).

% Medium pause (equal in length to 4 commas).

L Long pause (equal in length to 8 commas).

! Hookflash.

[ ] Enclosing the number in brackets prevents the mailbox owner from being

able to call in and change the number.

{} Specifies a line group is to be used (for example, {A}555-1212 indicates

“choose any line in line group A, and dial the number 555-1212”).

H Hang up immediately after dialing the number (must be last character).

M Answering machine. This must be the last character in the telephone

number. It tells the Lite system that the number being called has an

answering machine attached. When the Lite system calls the number, it

announces that there are messages, as usual. If the Lite system has not