Installation manual

LITE SYSTEM INSTALLATION AND SUPERVISOR GUIDE 9.0 VER. 1

3. To go to Page 4 of the Mail Box setup screen, press <F9>. The Page 4 screen displays.

4. Confirm that the ENABLED field is set to Yes for all four personal distribution lists. This

allows subscribers to create up to 4 personal distribution lists in their mailboxes, which

they can then use when sending messages to groups of subscribers.

5. Repeat steps 1 through 9 to customize each mailbox you created for each subscriber on

the system. Once you customize all subscriber mailboxes, continue with the next

procedure.

2.5.6.8 Customizing the System Supervisor Mailbox

1. To access the system supervisor mailbox, press <F4>. A small window displays

prompting you for the box number. Type 70 then press <Enter>.

2. Press <Enter> to move the cursor to the FIRST NAME field. Type SUPERVISOR in this

field. Press <Enter> to move the cursor to the LAST field. Enter the system supervisor’s

last name. Note that though you may type any name or words in these fields, using these