Installation manual

LITE SYSTEM INSTALLATION AND SUPERVISOR GUIDE 9.0 VER. 1

MAX LINES ALLOWED TO HOLD FOR ONE BOX: 2

WHILE IN QUEUE, SAY POSITION IN LINE? No

TRY EXTENSION 3 TIMES BEFORE GOING BACK TO CALLER

RESTRICTED DIGITS: [None]

• Class of Service 7:

∗ Set up with the class of service 0 options, but with SUPERVISOR STATUS? enabled.

• Extension Length:

∗ 3 digits

• Password Length:

∗ 4 digits

• Default Passwords:

∗ Equal the mailbox numbers

• Mailbox 70:

∗ Set up as the Supervisor mailbox with CLASS OF SERVICE: 7

• Prototype mailbox 9994 (features automatically assigned to all mailboxes created):

TRANSFER TYPE: Wait for Ring

CLASS OF SERVICE: 0

To: X (signifies the mailbox number)

CURRENTLY ENABLED: Yes

TRANSFER SCHEDULE: Always

PASSWORD: X (signifies the mailbox number)

SEQUENCE TO TURN ON/OFF MESSAGE WAITING LAMP: (set by Integration program)

AFTER PLAYING GREETING: Wait for digit

2.7 Setting Up the System Using the Teleparameter

Feature

This section provides instructions on using the teleparameter feature to set up a new system at

a customer site or to later make modifications to the system. Using the teleparameter feature,

you can change the parameter values that affect system-wide setup information, box setups,

and VM.CFG file data by simply calling into the system. You simply log into supervisor

mailbox 70 over the telephone, select to modify system parameters, then, as prompted, enter